Z probe offset issue

Hi all again can any one pint me out here please.

I just configured Marlin on my corexy all works fine

Got Z probe on Got setting uncommented for home and bed level with same probe.

Auto level works runs fine

But problem I got I cant get Z probe offset to do anything no mater why I put there nothing changing


eeprom rewrited NOTHING

Used LCD to change it still nothing

I can manually lover it down but when I press home it go up again

Can any one help me here please????


Regards

Z home will put the nozzle at +Z probe offset. If you want the nozzle to touch the bed, send G1 Z0.

Quote
stephenrc
Z home will put the nozzle at +Z probe offset. If you want the nozzle to touch the bed, send G1 Z0.

Hi thanks for reply.

It shows offset on LCD screen but looks like its ignoring it.

Worked fine on Repetier but was giving fatal error on G29

Home safe enabled

G29 runs fine but cant get offset sorted

Regards

Do you have the define min_software_endstops set to false?

Quote
stephenrc
Do you have the define min_software_endstops set to false?

Thanks for reply I have done this to get offset so its on false.

Regards