Welcome! Log In Create A New Profile

Hasil Printer 3d jadi berserabut

zonestar_i3

Hasil Printer 3d jadi berserabut
November 17, 2015 10:50PM

Registered: 8 years ago
Posts: 3

numpang tanya sambil belajar gan

ane punya 3d printer merk zonestar(Buatan china)

tapi setiap nge print ada perpindahan extruder, pasti ada filament yg alus" nempel(Berserabut)
gimana cara ngatasin nya gan
smiling smiley

Reply Quote

djunz.aza

Re: Hasil Printer 3d jadi berserabut
November 18, 2015 04:12AM

Registered: 8 years ago
Posts: 37

Retract Distance naekin. ane pake 2mm. retrac speed ane pake 30ms. travel speed juga agak cepet. ane pake 75ms.

Reply Quote

zonestar_i3

Re: Hasil Printer 3d jadi berserabut
November 18, 2015 10:26AM

Registered: 8 years ago
Posts: 3

Quote
djunz.aza
Retract Distance naekin. ane pake 2mm. retrac speed ane pake 30ms. travel speed juga agak cepet. ane pake 75ms.

thanks gan, ane coba dulu ya, nanti laporan dimari hasil nya

Reply Quote

Hendri_jb

Re: Hasil Printer 3d jadi berserabut
November 28, 2015 08:49PM

Registered: 8 years ago
Posts: 58

Quote
djunz.aza
Retract Distance naekin. ane pake 2mm. retrac speed ane pake 30ms. travel speed juga agak cepet. ane pake 75ms.

Maaf nyolong, mau tanya...

Setting Retract di slic3r dimananya?
Terima kasih.

Edited 1 time(s). Last edit at 11/28/2015 08:49PM by Hendri_jb.

Reply Quote

Vashikovich

Re: Hasil Printer 3d jadi berserabut
November 29, 2015 05:53AM

Registered: 8 years ago
Posts: 49

Quote
Hendri_jb

Quote
djunz.aza
Retract Distance naekin. ane pake 2mm. retrac speed ane pake 30ms. travel speed juga agak cepet. ane pake 75ms.

Maaf nyolong, mau tanya...

Setting Retract di slic3r dimananya?
Terima kasih.