(Netherlands) Fully built mendel for sale, generation 6 electronics

I have a fully built mendel for sale. I bought it at www.mendel-parts.com and built it, but now I don't have the time anymore to play with it.
The price is 550,- and it can be picked up in Delft or delivered if necessary.

This is the list of parts that I ordered approximately a year ago. The reprapped springs have been replaced by steel springs, since the reprapped ones broke.
The reprapped parts are white (picture will be added later today)

This complete mendel parts kit contains:
1 x motor NEMA17 set of 4 (motor_4xset_nema17_1684B_01)
Molex connector(s)
1 x Thermal-barrier and nozzle (thermal_barrier_nozzle_05mm) Glue option pre-glued
1 x Reprap plastics - kit 1 (Reprap_plastics_kit_1) Color white
1 x Kit 2 - all hardware cut in correct sizes (kit_2_cut_mendel_01)
1 x m4 insert piece for Adrian's geared extruder (m4_insert_brass_Adrian_geared_extr)
1 x Reprap plastics - Adrian's Geared Extruder (Reprap_plastics_adrian_geared) Color white
1 x Generation 6 electronics (gen6_assembled_PC incl opto's on correct cable lengths with molex connectors
1 x Kit 7 - all thick & thin sheet in black POM + ALU for GEN6 (kit_7_thick_thin_sheet_mendel_02)
1 x bolts, nuts, washers set for Adrian's Geared extruder (bolts_set_adrian_extr_v1)
1 x Kapton tape 13mm 33mtr (kapton_tape_13mm_33m_01)
1 x PLA 4043D filament 1 lb / 0,45kg - 2,9mm - white (pla_white_3mm_1lb_)
1 x NiChrome Wire 30AWG - 1mtr (nichrome80_1mtr)
1 x Power Supply 60W 5-12V (powersupply_60W-5-12V)
1 x profi printed belt pulley set nophead's version (profi_printed_belt_pulley_set_mendel_nophead_01)

Hello,

is this a fully working mendel? Did you print with this machine?
I would come to Delft if you can give me an introduction in the machine
and show me how to print.


thomas

Can I still buy this mendel? I live in Pijnacker

Hi,

Do you still hav the mendal for sale? I live in Den Haag and would like to see it working ( and buy it)

Kind regards,
Singh

is je apparaat nog te koop?

Beste Aaron,

De printer is nog te koop.
Hij print, maar kan strakker printen door van het printbed nog een heated printbed te maken.
Een beetje zin om aan de machine te prutsen is denk ik wel verreist.

Ik hoor het graag als je interesse hebt,
Marjolein

Dear Singh,

The mendel is still for sale.
It prints, but the result can be improved by changing the printbed into a heated printbed.
A little enthusiasm to make adjustments to the machine is probably necessary.

I like to hear it if you're still interested,
Marjolein

Beste Marjolein,
ik heb geen ervaring met dit soort forums, ik wachtte op een email. Dus nog maar eens de vraag of je printer nog te koop s, in dat geval ben ik zeker geïnteresseerd.

Aaron