Welcome! Log In Create A New Profile

Advanced

Mendel Machined Extruder Parts Kit (Extruder Version 2.0)

Posted by reifsnyderb 
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
December 20, 2009 06:50PM
Brian,

I am interested in two sets. Both PTFE. One with the 0.5mm orifice, one with the 0.3mm orifice. I am in West Virginia. Please contact me at

Edited 2 time(s). Last edit at 03/06/2010 12:32PM by buzzard192.
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
December 21, 2009 08:41AM
PM sent.

Regards,

Brian



buzzard192 Wrote:
-------------------------------------------------------
> Brian,
>
> I am interested in two sets. Both PTFE. One with
> the 0.5mm orifice, one with the 0.3mm orifice. I
> am in West Virginia. Please contact me at
> joe@pfaltz.com
>
> Thanks,
> Joe
Hi, Brian.

I'd like one PTFE kit. Please contact me at rob @ ldg . net

Thanks!
Rob.
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
December 22, 2009 09:24AM
E-mail sent.

Rob Wrote:
-------------------------------------------------------
> Hi, Brian.
>
> I'd like one PTFE kit. Please contact me at rob @
> ldg . net
>
> Thanks!
> Rob.
Hi, We'd like a PTFE kit. We're from Belgium, Europe. Please contact us at reprap @ dimitrivanheucke.be for details. Tnx!
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
December 22, 2009 03:35PM
e-mail sent

Dimitri Van Heucke Wrote:
-------------------------------------------------------
> Hi, We'd like a PTFE kit. We're from Belgium,
> Europe. Please contact us at reprap @
> dimitrivanheucke.be for details. Tnx!
Very interested in a set or 2. Please contact! smiling smiley

jacob -----at---- heatsynclabs -- --dot - -- org
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
December 24, 2009 03:36PM
Hello,

E-mail Sent.

Brian







Jacob Rosenthal Wrote:
-------------------------------------------------------
> Very interested in a set or 2. Please contact!
> smiling smiley
>
> jacob -----at---- heatsynclabs -- --dot - -- org
am very interested in a kit! am from the UK please email me at sweaving@aol.com with a price inc postage.

Cheers Steve
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
December 25, 2009 04:26PM
E-mail sent.

Thanks,

Brian


steve Wrote:
-------------------------------------------------------
> am very interested in a kit! am from the UK please
> email me at sweaving@aol.com with a price inc
> postage.
>
> Cheers Steve
daniel -/- dot -!- zukowski -#- at -.- gmail -(- dot -&- com

Please contact for 1 kit please. Thanks!
email me at ashaocat@gmail.com with ordering information please. probably one kit but perhaps 2. Canada.
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
December 25, 2009 10:39PM
E-mails have been sent.

Thanks,

Brian
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
December 25, 2009 11:33PM
Hello,

I was unable to e-mail you as I received a notification that the delivery failed. Please e-mail me at reifsnyderb -at- hotmail -dot- com. I have included the contents of my e-mail immediately below.

Regards,

Brian


For a parts kit, which contains one PTFE thermal barrier and one combination nozzle, please send $16.40, via Paypal, to reifsnyderb -at- hotmail -dot- com (The cost is $9.90, for the parts kit, plus $6.50, for international shipping.) Please include an additional $9.90 for each additional parts kit.

Thanks,

Brian



Hiroe Wrote:
-------------------------------------------------------
> email me at ashaocat@gmail.com with ordering
> information please. probably one kit but perhaps
> 2. Canada.
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
December 28, 2009 03:54AM
Any kites left?
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
December 28, 2009 05:45PM
Hello,

Yes, I have the kits "in stock," have the stock to make more, and have more stock on order.

Regards,

Brian


jpcw Wrote:
-------------------------------------------------------
> Any kites left?
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
December 28, 2009 05:54PM
Brian -

Just wanted to let you know that I received the parts and they look great. Thanks for the fast shipping!

Edited 1 time(s). Last edit at 03/06/2010 12:32PM by buzzard192.
Could I purchase a kit please, if you have any left?

scott dot gallagherstarr at gmail dot com.

Thank you!
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
January 08, 2010 09:02AM
Hello,

I have plenty of kits left and have sent you an e-mail.

Thanks,

Brian



Scott Gallagher-Starr Wrote:
-------------------------------------------------------
> Could I purchase a kit please, if you have any
> left?
>
> scott dot gallagherstarr at gmail dot com.
>
> Thank you!
Hi!

I've just found this thread, and I would like to know if you still make Mandel parts? I'm interested not only in the "Non-rapid-prototyped" but in all the plastic "reprapable" parts also. If you don't sell the parts kit, do you know of someone who does?

Thank you very much,

Lucas
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
January 09, 2010 02:20PM
Hello,

Yes, I still make Mendel parts. However, I don't have any of the "Reprapable" parts available and only sell the "non-reprapable" extruder parts at this time.

Regards,

Brian



Lucas Chiesa Wrote:
-------------------------------------------------------
> Hi!
>
> I've just found this thread, and I would like to
> know if you still make Mandel parts? I'm
> interested not only in the "Non-rapid-prototyped"
> but in all the plastic "reprapable" parts also. If
> you don't sell the parts kit, do you know of
> someone who does?
>
> Thank you very much,
>
> Lucas
Hello,
Im interested in purchasing an extruder kit. Can you email payment info if they are still available? Thanks in advance.
-Andrew
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
January 19, 2010 06:22PM
Hello,

Parts kits are still available. I am e-mailing you the information.

Regards,

Brian


Andrew86 Wrote:
-------------------------------------------------------
> Hello,
> Im interested in purchasing an extruder kit.
> Can you email payment info if they are still
> available? Thanks in advance.
> -Andrew
Hi I'm interested in a mendel extruder kit. Please contact me if there's one available.

thanks
Thomas
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
January 20, 2010 06:32PM
Hello,

I have sent you an e-mail.

Regards,

Brian


thomas Wrote:
-------------------------------------------------------
> Hi I'm interested in a mendel extruder kit. Please
> contact me if there's one available.
>
> thanks
> Thomas
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
January 21, 2010 06:21PM
Hi,

I am interested in purchasing an extruder kit as well.

Matt.
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
January 22, 2010 09:06AM
PM sent.

w0otness Wrote:
-------------------------------------------------------
> Hi,
>
> I am interested in purchasing an extruder kit as
> well.
>
> Matt.
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
January 25, 2010 11:48AM
btt
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
January 30, 2010 10:49AM
Hello,

I'm from the Netherlands, Europe, and I'm interestend in one set (PTFE). Could you email me te costs for the parts and shipping? My email is Nielsvanrijn at hotmail dot com.

Thanks,

Niels
Re: Mendel Machined Extruder Parts Kit (Extruder Version 2.0)
January 30, 2010 03:55PM
Hi I'm interested in a kit as well.

thanks
Sven
Sorry, only registered users may post in this forum.

Click here to login