Auction for mendel-parts in Germany AUCTION IS OVER

Is anyone interested in having a set of mendel-parts printed?
If there is interest I would start an auction at a minimum of 120eur
to be payed when they are done (can take serveral weeks untill all
parts are made).

They would be printed in white ABS on a RepMan, probably with 0.25mm
layer-height.

Two answers are enough, no need for a giant "mee too"-list,
no discussion about a price. When there are 2 prople interested
I´ll start an auction on ebay.de. If one one person is interested,
the price is fixed at 120.

Update: Skeinforge calculated 118h of build time + setup/cleaning + mabe 20% bad/aborted prints. So I may go with 0.35 or 0.40mm layers where it does not matter.

Update:
okay, auction has started.

http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=320483562224

The first 18 parts are already printed and counting.
In 10 days we will have a winner who gets the set.
After that I´ll decide if I print more.

Update: (2010-02-10)
only 7 parts + 2 frame-vertices left to be printed


Update:
The auction is over. The price was 226,83 eur.

Edited 6 time(s). Last edit at 02/13/2010 10:18AM by MarcusWolschon.

---

-------------------------------------------
* homeprototype free 3d design repository
* Blog
* Google+

Yes, i'm interested.
120€ + Shipping. Money ahead.

And I promise: when my Mendel is up and running I'll offer the same to someody else.

Tilo

Only one person interested?
I´ll keep this offer open until Friday.
The first parts are already printing. Looks fine.

---

-------------------------------------------
* homeprototype free 3d design repository
* Blog
* Google+

if you can ship to usa, i'm interested. im having a hellova time finding the printed parts

I can ship everywhere.


Shipping to the US is 34eur extra (it can be done cheaper but after 100+ hours of
printing I really like to have tracking and insurance. ).
For Germany it would be 4eur and thus does not really matter.

I guess for the USA the simplest payment would be Paypal.
For the paypal fees that would be +5%.
For EU it would be a SEPA bank transfer that usually has no
fees at all.

So the biggest issue is just that I´ve already begun printing
and of cause started with metric parts. But I can do imperial
ones as well.

Edited 1 time(s). Last edit at 02/07/2010 08:03AM by MarcusWolschon.

---

-------------------------------------------
* homeprototype free 3d design repository
* Blog
* Google+

I am also interested!

Only have a few of the thick cut parts to make and then it is only the RP parts that I am missing!

okay, auction has started.

http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=320483562224

The first 18 parts are already printed and counting.
In 10 days we will have a winner who gets the set.
After that I´ll decide if I print more.

Edited 2 time(s). Last edit at 02/07/2010 08:03AM by MarcusWolschon.

---

-------------------------------------------
* homeprototype free 3d design repository
* Blog
* Google+

hi
I have added a bid can you make one more?
Once I am up and running I promise to make one set in the first 4 weeks and a second set there after for others.
yours
Tansen
Denmark
"Mendel on my mind"

tan Wrote:
> I have added a bid can you make one more?

I´ll decide that after this set is done.
It´s a lot of work and this is not the only thing
I want to use my precious free time for.

Status: 24 parts done, 80 to go.

---

-------------------------------------------
* homeprototype free 3d design repository
* Blog
* Google+

The Auction is currently 139eur and ther are still 4 days to go if you want the parts.
It is unlikely that I´ll make another set after this one for a while.
(So much else to print. So much to do besides printing all the time.)


[cgi.ebay.de]

Edited 2 time(s). Last edit at 02/07/2010 08:03AM by MarcusWolschon.

---

-------------------------------------------
* homeprototype free 3d design repository
* Blog
* Google+

I added a new photo of the parts produced by now.
It´s comming along nicely and by this night only the
parts starting with y* and z* should be left to do.

70 of 95 parts done and still printing...

[cgi.ebay.de]

Edited 2 time(s). Last edit at 02/07/2010 08:04AM by MarcusWolschon.

---

-------------------------------------------
* homeprototype free 3d design repository
* Blog
* Google+

Are you making only one set?

Are you making a set for yourself as well?

I´m not building a mendel.
My RepMan and some replacement-parts for it are all I need.

One set is more then enough work.


http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=320483562224

Edited 1 time(s). Last edit at 02/07/2010 08:04AM by MarcusWolschon.

---

-------------------------------------------
* homeprototype free 3d design repository
* Blog
* Google+

3 days 8 hours left to go.

Only 13 parts left to be printed.

Additional photo being uploaded.

http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=320483562224

Still shipping worldwide.
Print Quality on the RepMan is better then what most of the RepRep Mendel and Darwin
produce. (printing at 0.25mm layer height and 16mm/s)

---

-------------------------------------------
* homeprototype free 3d design repository
* Blog
* Google+

23Std. 24Min. 58Sek. to go
all parts are printed.
I´m currently printing replacements for 2 parts
that have a defect that does not however affect them
performing their function.

CLICK HERE

---

-------------------------------------------
* homeprototype free 3d design repository
* Blog
* Google+

hi
Did not win auction
are you going to print some more I would be intersted?
kind willing to wait mendel seeker
yours
Tan Denmark

hi
good luck with the new designs
kind regards
Tan

tan Wrote:
-------------------------------------------------------
> hi
> Did not win auction
> are you going to print some more I would be
> intersted?
> kind willing to wait mendel seeker
> yours
> Tan Denmark


I don´t know yet.
First I´ll build my heated bed and buy an Aligre Design
-license with half the money.
Then build some other stuff that had to wait while I
printed all these parts.

---

-------------------------------------------
* homeprototype free 3d design repository
* Blog
* Google+