Any Interest in Laser Cut CupcakeCNC (Makerbot) Parts?

I am starting a Makerbot clone project. I have access to a cnc laser at work so I am cutting my own plywood and acrylic parts to save a little dough. Is there any interest in me cutting additional sets for anyone? I am not looking to start a business for these parts just help out someone trying to get started.

If there is interest, reply, pm me, or email: d.e.ferrier (at) gmail.com

I look forward to helping some fellow repstrappers!

Edited 1 time(s). Last edit at 04/15/2010 03:09PM by Deferr.

The set will include the following parts per the Cupcake CNC BOM on their website. They will all be cut from Makerbot's CAD data. Anyone Interested?

X Axis Parts:
X stage 5mm plywood 1
X left 5mm plywood 1
X right 5mm plywood 1
X rib 5mm plywood 1
X front 5mm plywood 1
X back 5mm plywood 1
X clamp 5mm plywood 2
X top 5mm plywood 2

Y Axis Parts:
Y stage 5mm plywood 1
Y front 5mm plywood 1
Y back 5mm plywood 1
Y rib 5mm plywood 1
Y clamp 5mm plywood 1
Build platform 5mm plywood 1
Build Surface 1/8" fluorescent acrylic 1

Z Axis Parts:
Bottom Panel 5mm plywood 1
Middle Panel 5mm plywood 1
Power Panel 5mm plywood 1
Top Panel 5mm plywood 1
Back Panel 5mm plywood 1
Front Panel 5mm plywood 1
Left Panel 5mm plywood 1
Right Panel 5mm plywood 1
Z Stage 1/4" clear acrylic 1

Miscellaneous Parts:
Bearing Bracket (bb) 5mm plywood 8
Z Stage Guides (zg) 5mm plywood 4
X Rod Covers (rc) 5mm plywood 4

Contact me:
D.E.Ferrier(at)gmail.com

Are these from their latest build? Because some of the parts on the xy platform were changed.

Dave C Wrote:
-------------------------------------------------------
> Are these from their latest build? Because some of
> the parts on the xy platform were changed.

I am using the most recent files that they have released on their subversion site. The url is listed below. Do you know what the changes are? I could check. I will test fit the first set to make sure they fit up.

http://svn.makerbot.com/tags/cupcake-cnc-batch-3-4/

there was a small change to the x platform i believe.

I am starting a Makerbot clone project. I have access to a cnc laser at work so I am cutting my own plywood and acrylic parts to save a little dough. Is there any interest in me cutting additional sets for anyone? I am not looking to start a business for these parts just help out someone trying to get started.

Interesting. You may want to look into your local RepRap User Group:
[forums.reprap.org]

Also, you may want to make a [reprap.org]
(If you do, please buy a set of electronics from Kymberly if you don't have electronics.)

---

-Sebastien, RepRap.org library gnome.

---

Remember, you're all RepRap developers (once you've joined the super-secret developer mailing list), and the wiki, RepRap.org, [reprap.org] is for everyone and everything!

Dave C Wrote:
-------------------------------------------------------
> there was a small change to the x platform i
> believe.


I have looked into this a little. If you go here, you will see the old version versus the new version of x platform pieces. I will cut the new version.

I have had 2 people with interest but no one has yet taken me up on this. I have not yet cut these so if you are interested let me know.

Hi There

How much for the kit and shipping?

hi just asking,what is the part of acrylic flatform stage?

rania Wrote:
-------------------------------------------------------
> hi just asking,what is the part of acrylic
> flatform stage?

This is the surface that the part is built on.


I have had one person want the electronics panel. Anyone else? I will be renting time tomorrow. I can do it again but only if there is enough interest.

I'm interested in the whole kit. Let me know the cost and shipping! Thanks!

nvm. I'll make them myself I guess you aren't doing it anymore o.o

Edited 2 time(s). Last edit at 05/16/2011 02:12PM by noobcake.