Welcome! Log In Create A New Profile

Advanced

Stepstick - open source pololu clone

Posted by brupje 
Stepstick - open source pololu clone
July 20, 2011 01:52AM
[reprap.org]

"This is an Allegro A4983 / A4988 x4 breakout board for Sanguinololu. It can be snapped apart at the score in case of Allegro failure, and replaced with another or a Pololu. Snap all 4 apart and get a pin-compatible clones for use on boards like RAMPS or Gen7. "


Only EUR 9.50! - [shop.ebay.com]




reprapworld.com
PLA, ABS, PETG multiple colors (3 and 1.75 mm) €16,49 / kg
Megatronics 3.0 €79.99 / Minitronics €37,19
Re: Stepstick - open source pololu clone
August 04, 2011 12:11PM
Unless that is the 4-set it is a dollar more than the original it is cloning. Until we get these produced cheaper the original is back in stock: [www.pololu.com]

update: If you are across the pond these ARE a better deal, with .01 Euro shipping. Shipping from Pololu (in Nevada) overseas raises the price and time to get parts. So us Mericans can order the original, while you euro's get your knock offs. (Which coming from JoeM must be as good anyway)
Sorry, only registered users may post in this forum.

Click here to login