QuoteOrigamib As far as I'm aware, you'll need to make a script that asks if the endstop is currently triggered or not. This script would then end when a tool change procedure is initiated, and would restart once it has ended. If the endstop is not triggered on normal print procedure (not tool change) then printing will pause and wait for assistance, or alternatively it will retry docking / undocby wookie_666 - Let's design something! (I've got an idea ...)
QuoteOrigamib I'm working on a dual nozzle set up at the moment, but my system utilises a secondary lifting nozzle. I'm hoping the standby temperature feature of Duet will be enough to stop oozing. You may want to consider a detector built in to see if the new tool has been picked up. There is always a chance for a magnet to detach, and a small microswitch will stop any print failures. The softby wookie_666 - Let's design something! (I've got an idea ...)
Hey all. I have recently bought the MKS Sbase v1.3 for my core xy. I will be running dual extruders, and a 240v heated bed with a SSR running off the MKS. My question is this, Is there any other 12v out other than the two extruders,heated bed, and fan output. Or can I run the SSR off another Pin that can be used as the switch for the bed, and then use the heated bed output as a 12v out. Id liby wookie_666 - Controllers
Hey sorry for the late reply. The mechanism used to locate this is just 4 cone shaped points on one part and the coresponding crevices on the other part. This locks back into the exact same spot every single time. The magnets used are N52 Neodymium magnets with a holding force of 1.2kgs each. I am waiting on some parts which have a holding force of 3kgs each. This will ensure that it will alwaysby wookie_666 - Let's design something! (I've got an idea ...)
Hey all. I was pointed to this forum by someone after showing them my design for a docking system. Now this isn't the first idea by all means, more information can be found here, although I have designed this from the ground up to fit on my 2020 extrusion corexy machine. So far I have it docking and undocking a single tool. Although the main concept is working, and it repeatable, i would say tby wookie_666 - Let's design something! (I've got an idea ...)