Show all posts by user
Page 1 of 1 Pages: 1
Results 1 — 12 of 12
Ah, likely a linker error then. In my poking around, I noticed the Libraries folder of the RepRapFirmware project wasn't letting me open it to see the files included within, but was instead trying to look for EMAC, Lwip, etc in the arduino/libraries. Copying over the libraries from my project into the arduino/libraries allowed me to progress.
I'm seeing a couple errors:
cannot convert 'const ui
by
Superman6424
-
Firmware - mainstream and related support
The size_t error was with every C++ file. I've been adding paths to both C and C++.
I followed the rabbit hole a bit deeper with including some of these file until I got errors like
Function '__DMB' could not be resolved in Move.cpp and symbol 'WDT_MR_WDRSTEN' could not be resolved in RepRapFirmware.cpp.
I thought "__function"s were internal to the compiler? How is this not being picked up?
by
Superman6424
-
Firmware - mainstream and related support
Alrighty! The /C:/ error was just a typo fix, but it still left me with the GCodes.cpp.o error 1 message.
A few more days of frustration have passed. I caved, and eventually: reinstalled the eclipse/arduino IDE, arduino 1.4.8, and copied DC42's build command as close as possible.
I've finally gotten this lovely message:
'Finished building target: RepRapFirmware'
Unfortunately, there are still
by
Superman6424
-
Firmware - mainstream and related support
Still the same issue.
arm-none-eabi-gcc: error: /C:/Arduino/hardware/arduino/sam/variants/arduino_due_x/libsam_sam3x8e_gcc_rel.a: Invalid argument
make: *** Error 1
by
Superman6424
-
Firmware - mainstream and related support
Edit: Still some errors.
arm-none-eabi-gcc: error: /C:/Program Files (x86)/Arduino/hardware/arduino/sam/variants/arduino_due_x/libsam_sam3x8e_gcc_rel.a: Invalid argument
make: *** Error 1
and the original ones with all the .cpp.o files
by
Superman6424
-
Firmware - mainstream and related support
Here's what I've got
'Building file: ../Libraries/Wire/Wire.cpp'
'Invoking: Cross G++ Compiler'
g++ -I"C:\Arduino\hardware\arduino\sam\system\libsam" -I"C:\Arduino\hardware\arduino\sam\system\libsam\include" -I"C:\Arduino\hardware\arduino\sam\system\CMSIS\CMSIS\Include" -I"C:\Arduino\hardware\arduino\sam\system\CMSIS\Device\ATMEL" -I"C:\Arduino\hardware\arduino\sam\cores\arduino" -I"C:\Users\Ma
by
Superman6424
-
Firmware - mainstream and related support
Alright, I went through some of the paths and found some of them to still point to C:/Program Files (x86)/Arduino instead of just C:/Arduino.
I've tried compiling this on both of my rigs, with slightly different errors.
The setup with Arduino 1.5.8 gives me these errors & warnings:
make:*** Error 1
make:*** Error 5
I also get Error 1 for DDA.ccp.o, ethernetif.c.o, and RepRapFirmware.elf
I a
by
Superman6424
-
Firmware - mainstream and related support
Hi DC42, thanks for the tip!
I've included some of the missing directories into the project C/C++ General settings - strange that I got the project to compile before without these inclusions...
Now I'm seeing many unknown type errors:
C:\Arduino\hardware\arduino\sam\system\libsam/include/ssc.h:172:26: error: unknown type name 'Ssc'
void ssc_set_transmitter(Ssc *p_ssc, clock_opt_t *p_tx_clk_opt
by
Superman6424
-
Firmware - mainstream and related support
Hi DC42 (and others),
Since successfully building the project, I've let this slide for a bit, but coming back to it now, I'm having issues once again!
I'm still on Arduino 1.5.6-r2, but building from your latest dev branch.
I think I've followed the steps (created workspace, added make to path, overwritten Arduino libraries with core patches, identified RepRapFirmware include files), but I'm get
by
Superman6424
-
Firmware - mainstream and related support
Thanks dc42!
I'm planning on adding some custom functionality, or at least see how far I can get in doing it!
I wasn't aware that the plugin is so out of date. I was previously using Arduino 1.5.8, which might have caused some problems for me.
In 1.5.8, your tip in removing the references in A.COMPLIER.CPP.FLAGS let me move forward, but I was still missing some .h files that looked like they s
by
Superman6424
-
Firmware - mainstream and related support
I've been trying to build the existing RepRapFirmware for Duet without any luck. I'm a pretty big newbie to coding on this scale, so assume my prior knowledge is minimal at best!
Short version:
When I go to build, I'm getting g++ errors saying:
arm-none-eabi-g++: error: '-DUSB_MANUFACTURER=Unknown': No such file or directory
arm-none-eabi-g++: error: '-DUSB_PRODUCT=Arduino Due': No such file o
by
Superman6424
-
Firmware - mainstream and related support