Gave it a try, but sadly still no luck.by camcknight14 - General Mendel Topics
I just placed a jumper between the 5V and the VCC next to the reset switch on the RAMPS, and used that for power. Would it be easier if I just comment out the EEPROM?by camcknight14 - General Mendel Topics
Yes that is correct, the 20 is the extended angle, and the 100 is the retracted angle. Here is my servo settings from Marlin: (I have the number of servos as 4 because I was just trying all four pin selections on RAMPS to see if that would make a difference, it doesn't work even if it is just set to 1). // Number of servos // // If you select a configuration below, this will receive a default vaby camcknight14 - General Mendel Topics
It does not move when I send an M401 or M402 command. I changed the SERVO_ENDSTOP_ANGLES to {0,0 0,0, 20,100} in Marlin. I am new to all of this, so when you say eeprom, what do I need to do with that?by camcknight14 - General Mendel Topics
Hi everyone, I am trying to get the auto-leveling feature working, but I am having problems. When I send an M280 command in Repetier Host, it extends and works perfectly. So I know it works, and it is powered correctly. However, when I issue a G28 or G29 command, the axis move like they are supposed to, however the servo does not move. It just vibrates, but never actually moves. Any ideas?by camcknight14 - General Mendel Topics