Show all posts by user
Page 1 of 1 Pages: 1
Results 1 — 7 of 7
*SOLVED*
DeuxVis has worked on the advanced cool-plugin from SK.
The link to the plugin is below.
http://forums.reprap.org/read.php?154,149615,150750#msg-150750
by
tutu7931
-
Skeinforge
Hi all,
I found this image from previous post (see images), which shows there's more setting under the Cooling page,
however, mine only has few lines and doesn't have the function to let fan turn on after desired layer.
Anyone knows why?
I'm using Skeinforge(50)
by
tutu7931
-
Skeinforge
Thanks for all your reply
It is really. really, really strange.
After over 50 times printing of the same model, the waving shape never happen to me again.
I didn't change filament, setting and all that.
Strange.
by
tutu7931
-
Skeinforge
QuoteOhmarinus
Quote> Yes, I have measured the filament and the diameter usually 1.73-1.77 so I just use 1.75. And yet I use the same filiament for all these prints,
This is likely to be the problem.
.04 mm difference can cause this already!
I would try a different filament to see if it improves. Also check if the temperature really is stable during prints.
But it doesn't explain why the
by
tutu7931
-
Printing
All thanks for your reply,
Ohmarinus I've tighten up the belt but still..
KingRahl,
> my print model is 210x100x0.8mm so when skeinforge slices it the outcome is 4 layers and 100% infill.
> Sometimes the "wave" starts on 1st layer already, and sometimes it starts to happen on 2nd (which is when it starts doing the horizontal infill).
> I've tried slic3r, the surface is smoother I thin
by
tutu7931
-
Printing
Hello All,
This is my first post on this forum, I'm glad I found this place and willing to join the group.
Okay...I have a FF CreatorX and using Skeinforge+ReplicatorG for slicing
I started printing this piece 4 months ago, about 210x100 mm
however the "waving" unflatness keep happening on where it suppose to be completely flat (plz see attach images, focus on the red circle I drew)
I met a FF
by
tutu7931
-
Printing
Hello All,
This is my first post on this forum, I'm glad I found this place and willing to join the group.
Okay...I have a FF CreatorX and using Skeinforge+ReplicatorG for slicing
I started printing this piece 4 months ago, about 210x100 mm
however the "waving" unflatness keep happening on where it suppose to be completely flat (plz see attach images, focus on the red circle I drew)
I met a FF
by
tutu7931
-
Skeinforge