Thank you o_lampe, but i solved...i Don't really know why but the problem was because of the microstep set to 1/32 and the step/mm to 200 (i think because it's only an 8bit mega2560). Infact, simply lowering the step/mm to 100 (supposing the hardware was at 1/16) the problem disappeared. So i changed the jumper configuration for setting 1/16 microstepping and everything worked perfectly! Anywayby salva214 - Delta Machines
Hi everyone! I just finished my Kossel XXL, with ramps (marlin 1.04) and RPi2 (Octoprint last version). Is not the first kossel i do and i used on everyone the same fw as above. In the past i used octopi also (Don't remember wich version, but more than an year ago. - the Printer works perfectly in hardware and the software works grate when i use manual moves; - i used octopi for calibrating itby salva214 - Delta Machines
Hi guys, It's about 2 month i'm trying to solve a problem with my mini kossel: during the first layer on the perpendicular of the Z tower the head is too high under the tower (the filament doesn't stick or doesn't stick enough) and on the opposite side, the head "crashes" in the bed, scratching the kapton tape and jamming the extruder without extruding material. I tried to play with the hardwareby salva214 - Printing