Did you set the angles in the firmware? And be sure you have the wiring correct from servo to the Ramps. I had to rewire.by Justintime - General Mendel Topics
Turns out that my microswitch is broken. It opens... But not when you hear the click. So... First I will get a new one.by Justintime - General Mendel Topics
@hawk Zennmaster made a hardware video. Where he is explaining the hardware setup.by Justintime - General Mendel Topics
Thanks Skew for the info and YT demo. But you have similar behavior as I did. It probes three times (incl home) on the left and only one on the right. When you watch the video of Alex it probes on all four corners. So you hav. All the level differences. The second probe after the home probe is unnecessary.(I think) Thats what bothers me. Wish you could adjust the probe sequence. As Didby Justintime - General Mendel Topics
@skew. I have the exact same setup for my I3 The endstop for Y, is it set as end stop max or min in Marlin? And what is your probing sequence? Maybe you can post your whole config.h? It's driving me insane....by Justintime - General Mendel Topics
Hello Let me comfort you that you are not the only one. Where it's not working. Whole weekend spended on get it working. Without results. Mine probes. On g28 home. And g29 It probes home and two different places. I guess it has something to do with the probe sequence, which its not changeable (without code skills) And the position of the home switches. As for now I am done with it. Just lby Justintime - General Mendel Topics
I thought mine was working okay..... but it isnt......mechanicaly yes.... calculating No He does the probing but in a wrong sequence (then in the YT video).....when i press G28 it homes and probes... then i press G29 it probes again on the "home"spot and two different places. Not on three. The leveling is way off.... i see the z rotating.... when moving x axis etc..... I dont have a makerfarmby Justintime - General Mendel Topics
Na bijna een hele rol PLA aan testprintjes en calibratie objectjes. Toch even de vraag hier neer leggen. 1. Hoe bepaal je de maximale snelheid van je printer? Ik heb de standaard instellingen gebruikt van Slic3r en regel nu de snelheid met het LCD scherm. Deze draai ik soms naar 250% en dan ziet alles er nog best netjes uit. Als ik hoger ga dan gaat de extruder tegenstribbelen. Kan iemand zijn sby Justintime - Dutch User Group - Archive
The reason is z probing...... The servo arm is on the left of the extruder. So when I press home he misses the bed. Off course I could put the x home more to the right, but don't want to increase bed size. So I guess I have to mount the servo arm on the right then And cool fan on the left.by Justintime - General Mendel Topics
For an I3 I have a min. endstop left on the x axis. Is it possible, when I press home. X it will hit the end stop. And then the X will travel to the right. To its "new" home position. Where can I change it in the firmware? If possible...by Justintime - General Mendel Topics
Haha.... Auto bed leveling is working now. Thanks Alex for your help. Btw it's only working in Pronterface. Maybe worth mentioning, for Repetier users (like i was/am) Will there be support for Repetier - host?by Justintime - General Mendel Topics
Zo zit/zat het het ook, thermistor in gaatje..... Alleen bij de oude situatie zat er ruimte tussen het heatbed en glasplaat. Waardoor de thermistor niet goed de temperatuur door gaf... Mijn heatbed was gewoon bol. Ook als ik m vlak op de tafel legde.by Justintime - Dutch User Group - Archive
Je zou eigenlijk de temperatuur van het glas moeten meten. Bij mij was 60 graden eigenlijk lauw en dacht toch dat het warmer moest aanvoelen. Wat bleek, het heatbed stond lichtelijk bol naar beneden. Waardoor de thermistor in "de lucht" hing, en dus ook het contact tussen glasplaat en heatbed niet goed was. Ik heb bij een bouwmarkt hoge temperatuur kit gehaald en de glasplaat gelijmd. Wegby Justintime - Dutch User Group - Archive
Designed a servo holder for my extruder... i have a single plated x carriage and no holes in the extruder... i will upload the stl. to Thingyverse Followed the instructions..... but the servo is not responding. On the commands. You said i could use the standard Marlin. But that wasnt working for me in the first place. (when i had three end stops) I have one on the left for the X. and i have onby Justintime - General Mendel Topics
We wachten inderdaad in spanning af.... Weet je ook al welke kleuren je dan binnenkort krijgt en welke materiaalsoorten??by Justintime - Dutch User Group - Archive
Thanks I will do that then... Both mechanical. What lines in Marlin do I have to change? It was a long story for me to get the optical end stops working. Found the right optical config on the forum and copied to that. I mean the pins on the Ramps the connection for the end stops fx. Z endstop. The left is used and next to it there is one unused.... Is this a position for max endstop then?by Justintime - General Mendel Topics
Duckpower Wrote: ------------------------------------------------------- > Na D du e firmware van Repetier, vervolgens Marlin > toch die van Sprinter maar opgehaald en > voila....het werkt weer zoals vanouds! > > Graag had ik Marlin aan de praat gekregen maar er > gebeurden rare dingen: de richting was niet goed, > de snelheid was niet goed, de heater ging spontaan > aanby Justintime - F.A.Q. en Tutorials
How to implement mechanical z probe end stop with optical end stop? Can i put it in series with optical end stop? And what about the empty slot (end stop position) on the right on the Ramps? Is this usable? Can't see a description on the Ramps drawing.by Justintime - General Mendel Topics
Thanks..... Heb inderdaad een spoelhouder gevonden met lagers. Welke je weer kunt klemmen op het frame. Zie veel i3s met de y end stop daar. Dus vandaar op die plek. En gaat uiteindelijk toch weg. Vanwege z probing. @snelled Tja de firmware is gewoon veel googelen en heb veel aan de config h gehad van Eric. Ben nog wel ff zoekende wat alle instellingen zijn in Repetier. En ook welke deviby Justintime - Dutch User Group - Archive
En ook eindelijk ik ben aan het 3D printen geslagen....... Heb toch wel wat tijd besteed aan Marlin om alles werkend te krijgen....vooral de E steps voor de extruder was even lastig. Maar staat nu perfect afgesteld. Hierbij een fotootje, hoe hij geworden is....Paars filament is voor de WAF factor.... Even wachten tot Calis het Filament binnen heeft en dan wat opties printen ....zoals auto leveby Justintime - Dutch User Group - Archive
Dat ziet er goed uit.... Bedankt. Daar hebben we zeker wat aan. Wat zijn de meest essentiƫle instellingen die je moet aanpassen? Of is dat alleen het moederbord? Heb ik het goed als je zegt dat wanneer je de eeprom activeert dan kun je alle basinstellingen regelen en vastleggen via Repetier (windows) En wanneer niet dan pakt hij altijd de instellingen van config . En kun je geen basisinstellby Justintime - F.A.Q. en Tutorials
Ziet er inderdaad erg professioneel uit. Wordt het technisch een UM II? Of een I zoals het uiterlijk doet vermoeden. Het scheelt jullie hebben tenminste de delen binnen. Ik wacht nog steeds op de motoren en de Stepper drivers. Volgens mij zijn ze al drie keer de wereld rond geweest. Had je ook al wat tijd gevonden voor die handleiding? Succes met jullie nieuwe project.by Justintime - Dutch User Group - Archive
Just a noob question.... (still waiting for parts for my I3) so can't play and test yet. But for sure this is going to be on the I3. Its awesome... Question..... i quess you dont need a z end stop any more when you have this? And how did you mount the servo on the extruder part?by Justintime - General Mendel Topics
Ik wacht het af, alvast bedankt voor de moeite. Ik denk dat je er een hoop beginnende Reprappers er een plezier mee doet. Evbeurdn Wrote: ------------------------------------------------------- > Ik zal volgende week de handleiding hier posten. > De screenshots deden me de das om. Doe ik over. > > Ericby Justintime - Dutch User Group - Archive
Die "handleiding" lijkt mij wel interessant Eric. Ik had je al een PM gestuurd maar zag het bericht niet staan bij verzonden items. Dus twijfel of je hem gehad hebt. Ben inmiddels veel aan het inlezen terwijl ik op alle delen wacht. De x carriage is klaar. Nu is het wachten op lagers motoren en de belt. Ik heb de plate gewrapt in carbon. Leuk voor het visuele. Zou graag willen weten hoe ikby Justintime - Dutch User Group - Archive
Hotend is binnen.... zag dat de "weerstand" veel kleiner is dan het gat. Maar heb dit opgelost door het gat vol te stoppen met Firegum. Zoals ergens aanbevolen was. Frame is ook binnen.....nu de rest nog.... zal wel zo'n 3 weken duren voor ik eindelijk aan de slag kan. Lcd scherm ook maar vast besteld. Had mijn zinnen gezet op een full graphic display, maar dit wordt (nog) niet ondersteund doorby Justintime - Dutch User Group - Archive
Wat mij opvalt..... aangezien ik aardig wat bouw handleidingen heb gezien, ter voorbereiding. Is dat de vertanding van de riem gewoon over het lager heen gaat. Ik heb gelezen dat je m een kwart slag moet draaien zo dat de gladde kant over het lager gaat. Maar misschien werkt dit ook goed... of beter... Kan er nog niet over mee oordelen.by Justintime - Dutch User Group - Archive
Niet slim van hotends.com om er altijd "out of stock" neer te zetten. Anders had ik m daar besteld. Maar goed we zien wel. Die 3d industries ziet er inderdaad goed uit en kan zo te zien uitgewisseld worden met j-head mount. Alleen heeft hij een nozzle van 0.3mm wat dus inhoud dat je gedetailleerder kan printen, maar er wel langer over doet om te printen. Volgens mij.by Justintime - Dutch User Group - Archive
Bedankt, heb even in de software gesnuffeld. Ik las dat Marlin veel gebruikt wordt. Maarje kunt toch ook de Arduino config van Repetier laden? Als je Marlin gebruikt welk Windows programma heb je dan nodig? Of haal ik nu alles door elkaar? Nogmaals, in de software moet ik me nog verdiepen. Eerst bouwen en dan de rest.by Justintime - Dutch User Group - Archive
Bedankt voor al jullie tips. Ik heb de hotend inmiddels besteld. Bij reprapworld.com. Een J-head 0.5/3mm. Ik heb bij hotends.com gekeken maar daar was hij "out of stock" Dus vandaar bij reprapworld besteld. Ook nog bij charlie3d in Belgiƫ gekeken. Alleen zijn de verzendkosten wat hoog. (sorry Charlie) Volgens mij is dit een kloon. Maar heb al gelezen dat er regelmatig wat mis kan gaan. Als daby Justintime - Dutch User Group - Archive