Show all posts by user
Malaysia RepRap Kumpulan
Page 1 of 1 Pages: 1
Results 1 — 25 of 25
Ultimaker 2 Heat Bed
Complete with Temperature Sensor and Wiring
http://www.ebay.com/itm/252287077122
Specifications :
Size : 239.5 x 257mm
Sensor : PT100B
Voltage : 24V
Material : 2mm Aluminium
This is a high quality replacement heat bed for Ultimaker 2 3D Printers. The base material is 2mm thick aluminium.
It heats up to 100deg C in under 10minutes. This heat bed comes with PT100B
by
blomker
-
For Sale
Olsson Block for Ultimaker 2 available on eBay :
http://www.ebay.com/itm/252237569691
USD79.99 with free shipping to United States via DHL. Add USD 10 for shipping to everywhere else worldwide.
by
blomker
-
For Sale
Price revised to $599USD ONLY!!! Get it now from http://www.blomker.com
by
blomker
-
For Sale
This is a complete Kossel Mini 3D Printer kit. Buy now from http://www.blomker.com
Kossel Mini Assembly Guide :
http://blomker.com/Kossel_Mini_Assembly_Guide_V1.0.pdf
Content :
Frame :
Openbeam 15x15 Anodized Black Extrusions (240mm length - 9pcs)
Openbeam 15x15 Anodized Black Extrusions (600mm length - 3pcs)
180mm round glass, 3mm thick
For linear motion on the 3 towers :
HiWin Compatibl
by
blomker
-
For Sale
Prusa i3 from www.blomker.com at $659USD
ebay Store : http://stores.ebay.com/Blomker-Industries
Josef Prusa re-designed the Prusa Mendel from scratch and pumped in a lot of great DFA (Design for Assembly) innovation. The result is an assembly friendly Prusa i3 which can be assembled in less than 7hrs for beginners. This is the Single Plate Aluminium Frame version with 10mm Smooth Rods (Y Axis)
by
blomker
-
For Sale
Prusa i3 from www.blomker.com at $659USD
ebay Store : http://stores.ebay.com/Blomker-Industries
Josef Prusa re-designed the Prusa Mendel from scratch and pumped in a lot of great DFA (Design for Assembly) innovation. The result is an assembly friendly Prusa i3 which can be assembled in less than 7hrs for beginners. This is the Single Plate Aluminium Frame version with 10mm Smooth Rods (Y A
by
blomker
-
For Sale
One of our MendelMax modified to Dual Extruder....
by
blomker
-
For Sale
I have one unit of completely assembled and calibrated Prusa i3 for sale at $880 SGD.
SMS me at 81592655. Specifications as below
- 1.75mm Filament (PLA Only)
- MK7 Direct Drive Extruder System
- Print size : 200x200x160mm
- Minimum print height resolution : 0.1mm
- LCD Controller with SD Card Reader (No PC required for printing)
- 8GB Kingston SD Card included
- 1 roll of Red PLA Filament in
by
blomker
-
Singapore RUG
Hi Milo, you may consider getting a Prusa i3 complete kit from Blomker Industries. Available at www.blomker.com
Lets meet up this week so I can show you the assembled machine.
Regards,
Bayer
by
blomker
-
Singapore RUG
This is the Pixar Luxo Lamp by Makerbot. Design files available at http://www.thingiverse.com/thing:27062
Printed on our MendelMax :
by
blomker
-
For Sale
Something for the day :
by
blomker
-
For Sale
Hi Vitaly,
Please e-mail me at blomker@blomker.com
I am sure something can be done to get the complete kit shipped to you in a box
by
blomker
-
For Sale
The maximum printing area is 200x200x160mm (WxLxH). It is limited by the size of MK2 heat bed.
However, printing of PLA object does not require the heat bed and the print platform can be extended to a larger size.
Just relocate the limit switches and mount a larger piece of glass with some clips available from thingiverse.com
Probably I will post a guide on how to extend the print area for PLA
by
blomker
-
For Sale
Hello Ed & Lee,
You will have to get the local glass shop to cut a 200x200x3mm glass to be used as print surface.
Cover the glass with Kapton tape for printing with PLA & ABS.
Or, just cover it with blue painters tape if you are printing with PLA only. Blue painters tape is also known as masking tape which is light brown in colour. I don't ship the glass because it will most likely bre
by
blomker
-
For Sale
Hi DeadPie,
Assembly is between easy to medium depending on individual's skill.
Minimal soldering is required.
You may refer to the build guide available at
http://blomker.com/BlomkerIndustries_MendelMax_BuildGuide.pdf to see how's the assembly like. I can guide you through if you face any problem.
E-mail me offline at blomker@blom
by
blomker
-
For Sale
Sorry guys, eBay takes away a huge chunk of the sales amount (12%) so I have stopped listing there.
I rather give buyers the 12% in a form of discount or freebies. Making RepRap affordable is the only way
for RepRap to keep growing in the open source space and slowly build an entry barrier for large organisations to
barge in. Once the big boys take over 3D Printing, we will be paying a fortune
by
blomker
-
For Sale
Now available from Blomker Industries at $127.99
BUY NOW at Blomker Industries eBay Store -- CLICK HERE
This is a fully assembled and tested PrintrBoard Rev D suitable for all RepRap and similar 3D Printers. The Printrboard electronic set was designed by members of the Printrbot team in order to eliminate the production and functionality shortcomings of older RepRap electronics sets. Printrboa
by
blomker
-
For Sale
MendelMax 1.5 complete kit shipped from Kuala Lumpur, Malaysia right here at http://blomker.com/product.php?id_product=24
Priced at RM1,999 - it is the most affordable MendelMax kit out there.
Cheers
by
blomker
-
RUG-MY
Some pictures of the assembled MendelMax 1.5 3D Printer kit.
Electronics and wiring not done up yet in these pictures hence they are not visible.
by
blomker
-
For Sale
I spent the past 1 month to optimize the MendelMax BOM so that it can be offered at a very affordable price.
For $699, you get a complete MendelMax 1.5 kit - shipping from Malaysia.
It is available at my eBay store http://stores.ebay.com/Blomker-Industries
Cheers
by
blomker
-
New Zealand RepRap User Group
I spent the past 1 month to optimize the MendelMax BOM so that it can be offered at a very affordable price.
For $699, you get a complete MendelMax 1.5 kit.
It is available at my eBay store http://stores.ebay.com/Blomker-Industries
Cheers
by
blomker
-
General Mendel Topics
We appeared to be quiet for a while because we were working hard in the background to develop the MendelMax 1.5 kit.
Finally, it is available on our eBay store http://stores.ebay.com/Blomker-Industries
$699 ONLY!!
Content of kit :
MendelMax 1.5 Printed Plastic Parts
Sanguinololu 1.3a + A4988 Stepstick Drivers
MK2 Heat bed with Fiber Glass Insulated Wire
NEMA17 Stepper Motors (40Oz/in) - 5
by
blomker
-
For Sale
Dear RepRap Enthusiasts,
Please check out our new combo package of Sanguinololu 1.3a + 4pcs Stepstick + MK2 Heatbed.
With this combo, you get the MK2 heatbed for only $12!!
Blomker Industries eBay store at Blomker Industries on eBay - Click Here
Now you get all the electronics in one package, spending less on shipping fee and putting more focus into building and calibrating your RepRap.
Your
by
blomker
-
For Sale
Dear RepRap Community,
Please check out some of the RepRap electronics that I am selling on eBay :
Blomker Industries on eBay
We throw in some freebies as token of appreciation for our customers.
Thanks
by
blomker
-
For Sale
When I first started building RepRap 3D Printers, the main challenge I faced was sourcing the required parts to successfully build one.
Either the parts were too expensive or the shipping fee from overseas was so high that I felt it was not worth paying.
We need more RepRap builders in Malaysia and start sharing knowledge and helping each other with machine build. Print the plastic parts of a Pr
by
blomker
-
RUG-MY