Today I wanted to rewire the electronics but before I started my ramps up one more time and it worked. I haven't touched the printer since I last tested it so now I'm even more confused. Anyway it works for now so fingers crossed it stays that way :pby Pianojungle - RAMPS Electronics
I first thought of a software issue myself. I first cleared the whole eeprom of the arduino and then installed the ramps test so that way i could exclude the software as an issue. I will try rewiring it to the socket of the second extruder and hope that this way I does work. Fingers crossedby Pianojungle - RAMPS Electronics
I checked the pins and they give good contact. I checked the potmeter too and it looks fineby Pianojungle - RAMPS Electronics
no sound or movement at all. I don't really know if they are in parallel or series since I connected there are two rows of four pins to connect them to. If I only connect one motor it doesn't do anything either so I don't thing it is a lack of current. It's just weir that the day before everything was working without a problem.by Pianojungle - RAMPS Electronics
Yep I tried it and the motors are running fine on other drivers so it must be the driver then I guess Edit: I replaced the driver and it is still not working ? I'm really out of ideas. This means the problem must be on the board no?by Pianojungle - RAMPS Electronics
Hey, quick troubleshooting question. My prusa i3 Z axis motors are suddenly not working anymore. I did the ramps test and tried attaching other motor to the Z-driver but they wouldn't work either. Should I conclude that the stepper driver is broken or are there other things I should look into?by Pianojungle - RAMPS Electronics
Hey fellow reprappers, I started today on assembling my homemade printer. Everything worked fine, I could move my axis with the repetier software. Then I added the endstops and i guess accidentally hit the wrong or so because it arched and suddenly there was smoke coming out of the board (don't know out of the arduino or the RAMPS). Now it doesn't work anymore In repetier I can still connect wiby Pianojungle - RAMPS Electronics