QuoteDust 3200 should be correct but it is is a lot of steps / mm for a old 8 bit controller. I would definitely change it to 1/8 micro stepping and set 1600 steps/mm you will need to reduce the X and Y DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } // X,Y,Z E See how Z is way slower, because Z is a lead screw (or threaded rod) Thanks! A stupid question - what dimensions are the BED_SIZE parameby anton74 - RAMPS Electronics
Hello, I am trying to build a CNC machine with a small XYZ stage. The motors are 24V x 0.6A, 1.8 degree/step. The stage uses M6 leadscrew. The motor drivers are A4988. I am using all 3 jumpers for each driver, so I understand that in the case A4988 it is a 1/16 micro-stepping. I defined the bed size in Marlin as 100 X 100 mm. For the control, I am using a Pronterface software. The problemby anton74 - RAMPS Electronics