Show all posts by user
Printing issues ...
Page 1 of 1 Pages: 1
Results 1 — 4 of 4
Well.
Perhaps it could have been, although it has been working fine for the last few days. The issue with the freeze on print start turned out to be a retraction speed of 60mm/s causing the machine to wait indefinitely at the start of the print. Setting Slic3r to max 30mm/s retraction speed has solved that seemingly separate problem.
by
VynZ
-
Printing
Update: Problem is back.
No control of hot end from Pronterface. All other controls work including control of bed temperature.
However sending a supplied gcode (snowman, coathook) reactivaates the hot end and object prints fine. Sending a gcode made by Slic3r does not work: printer stuck at waiting for hot end temperature to be reached. Hot end remains cold.
by
VynZ
-
Printing
Update: Tried again after 30 min of doing nothing. Now works.
Will update if it happens again.
by
VynZ
-
Printing
I have spent the last week assembling and commissioning my Ormerod and have printed 3 sets of axis compensation test pieces the last one being yesterday with no problems. I just sent my first proper print to the machine when I found it taking a long time to start printing.
After about 10 minutes of waiting I realised that the bed had reached temperature (57 deg) but the hot end was still showing
by
VynZ
-
Printing