Show all posts by user
Printing issues ...
Page 1 of 1 Pages: 1
Results 1 — 3 of 3
I am happy to help answer any questions you may have in converting your bfb3000. The printer was well worth the upgrade for many reasons. First, I can use the best software in my opinion for ease of use and speed which is cura by ultimaker. Second now i can use standard 1.75 mm fillament and have a finer nozzle for prints down to 50 microns with ease. I use ramps 1.4 running sprinter which is goi
by
KesL
-
Tantillus
I am using a MK8 extruder from ebay and when printing the first layer or two go good and the rest it sounds like clicking. all the extruder stepper does is stutter and not extrude. temp is at 230c for 1.75mm pla. .4mm nozzle.
by
KesL
-
Printing
I have converted a BFB 3000 printer to run on ramps 1.4. I use sprinter on the board and Pronterface and Slic3r as my slicer. I have the Z axis home to min (0). The platform moves head does not. So the platform moves to the bottom to home. When i start to print the xy home great and the z moves down hits the switch then goes to my desired z offset to be at the correct distance from the extruder.
by
KesL
-
Tantillus