Show all posts by user
Printing issues ...
Page 1 of 1 Pages: 1
Results 1 — 3 of 3
Been using Flashforge 3d printer to print using PCL (polycaprolactone) filament but havent been successfull yet . The extruder of the printer stops extruding (and this happens in the starting itself after extruding a single line or so). I am using a filastruder to make my filament and have been able to extrude in the diameter range of 1.6 to 1.71. While you you generally have 1.75 mm dia prescrib
by
aloksxn
-
Printing
Been extruding at arount 85 to 90 degrees. I have the changed the mounting of the extruder to a vertical position after which i could achieve a little bit consistency in diameter but still not enough precise to use it for 3d printing for which i need 1.7 to 1.75 mm dia
by
aloksxn
-
Plastic Extruder Working Group
I am new to filament extruding. I am using a filastruder to extrude a PCL filament. In order to use it to 3d print i need a constant dia of 1.75mm which i am not able to achieve. Any suggestions other than a filawinder??
by
aloksxn
-
Plastic Extruder Working Group