Show all posts by user
Printing issues ...
Page 1 of 1 Pages: 1
Results 1 — 3 of 3
Thank you for the help! I managed to fix the problem.
I sliced it in a way that the heated bed would slowly cool down a bit. After a few layers the temperature was dropped by 10 degrees.
The printer gave an error because it was not able to reach this temperature in time (it wasn't cooling down fast enough).
Thanks MCarmen and SupraGuy once again for thinking with me to fix the problem!
by
Rik
-
Printing
I tried increasing the baud rate, without succes unfortunately.
Reslicing does work (most of the times) indeed. This is fine if this happens 1 in 20 prints but so far it happens every 1 in 2 prints. And of course this is very frustrating for 10+ hour prints wich I turn on in the evening, hoping to find a finished print in the morning.
by
Rik
-
Printing
Hi all,
I did build my own delta 3d printer and am currently finetuning and I continuously bump into a problem.
When I try to print something the extruder sometimes stops moving completely. It won’t continue after waiting.
Remarkable is that the printer stops multiple times at the same place. I tried switching out the USB for 3 different SD-cards, this didn’t solve the problem but changed it. Wi
by
Rik
-
Printing