Show all posts by user
Page 1 of 1 Pages: 1
Results 1 — 2 of 2
Just 2 top layers. Had some holes so I plan to bump that up to 3 anyways. However, the slicing defect still occurs when I changed it to 3. Also, I have the extra perimeters checkbox already checked, sadly it did not fix the issue.
I've been using a 0.8mm nozzle, so I think the next thing I'll try is reverting back to the basic 0.4mm nozzle and see if the printer can just ignore the issue.
by
kryan3d
-
Slic3r
I have been struggling lately to successfully print on a new printer. However, my most recent issue seems to stem from Slic3r. As seen in the attached image, a roof is drawn over half of the infill to create a "stair step" shape. Slic3r does not generate a new perimeter for this layer. Instead, it connects some of the honeycombs along this edge, but not all. This results in the printer attempting
by
kryan3d
-
Slic3r