Btw Neil and Chris Thanks for your help I really appreciate it. There are alot of printer reviews and problems out there but not really a good guide how to print well like a newbie print guideby checkulater - Mendel90
I actually used most of your settings. The thing is I still get curling when trinting the bottom of the helmet. Still its the best print so far. Also I tried to print two marlins at the same time to get rid of the curling i noticed that the faults where the same on both. That is in the right eye there is a "bridge" and one string droops on both prints. Its not much of a problem but Id love a "peby checkulater - Mendel90
Wonderful print neil. Ive felt the same way about Marvin. I feel that if I can print it ive come along to understand printing much better. I'll try cooling it better to stop the curl. Also wondering why you got a sag in one of the eyes. Because for me when it prints the first line between the legs it just ejects a blob that hangs almost to the printbed. It relly doesnt look good.by checkulater - Mendel90
Super easy to understand but how do i strech it practically in the slicer or is that done automatically? Also the biggest issue is that my print tends to gurl up during printing making the print look bad.by checkulater - Mendel90
Thanks for all the info. For now Ive just bought faberdashery of differnet colors not whole spools. Also when it comes to diffrent speeds on the same print, what to choose? Also Ive use 10 degrees higher temp first layer to get better bed adhesion. Seems this is harder than i first thought. Lots of trial and error i think. Is the overhang and bridging worse on smaller prints (because of the temby checkulater - Mendel90
Thank you Neildarlow. Also im having trouble printing overhangs and and bridges. Is there some guide or tutorial on how to print and how to slice? I feel its probably my fault somehow not knowing what to do and how to do it. Think its a temprature and speed issue. Would really want some help maybe some settings or point in the right direction i.e where to find documentation or a good tutorial.by checkulater - Mendel90
Just sliced a hollow testcube in skeinforge and was happy with the results. Tried to slice in cura and when the printer started it started to sound funny and slow down. Did not like it so i stopped the print. Im thinking its due to absolute and relative extrusion. Just wondering how to be able to slice with cura. Tried to find where to set relative extrusion on the web but seems they dont supportby checkulater - Mendel90
Im working in norway this week but ill try when I come home. Can it be my nozzle thats dirty. Also any recommendations on filament? Any brand over another?by checkulater - Mendel90
Im using the tube. Can it be underextrusion?by checkulater - Mendel90
It is 0.2 mm. Btw thanks for a great kit.by checkulater - Mendel90
Afteradding tension to the y axle belt and some calibration this is the result. I dont know If you can se it but the Picture from the side you can see some gaps on the belly. Any ideas thanks.by checkulater - Mendel90
Thanks for your anwsers. I'll be checking it out tomorrow. My fillament is 2.9 and the slicer is set to 2.86 Is it such big difference? When I calibrated the extruder (50mm/s) I measured the thickness of the extruded filament as well and it was 0.6mm. Does that seem as much or is it about the right size? Also why is Skeinforge that is so much older than other slicers better? I mean its not updaby checkulater - Mendel90
Just finished the dibond kit bought from nophead. Just wondering if my prints look ok. Are the lines on the back supposed to be so visible? anything else you can spot. Really new to 3D printing. Also Im having trouble getting the print to stick to the bed.by checkulater - Mendel90