I have 0.7 nozzle and the shell thickness is now 0.7. So 1.4 to get 2 perimeters?by P4d0uch - Printing
And how can i force cura to do more perimeters?by P4d0uch - Printing
This one came out pretty good but infill was just 10% and no cooling so the top is with holes. Flow 90% 205°C PLA. Should i try even lower flow?by P4d0uch - Printing
Ok i will try 90 tomorow and i see if that helps.by P4d0uch - Printing
This is my latest print. Still PLA. This was at 97 flow 205°C but the corners are not perfectly starightby P4d0uch - Printing
no the corners shouldnt be rounded. the speed was: Print speed: 40, Outer Perimeter Speed: 40, Infill 53. at 220 degrees without heated bed. And it is PLA not ABS.by P4d0uch - Printing
I was wrong the last print was on 100% I didnt save the settings. This one is 96% flow and 20% honeycomb infillby P4d0uch - Printing
I'm at 98%. I will try 95 or 96 when i get home.by P4d0uch - Printing
Ok i will try the flow rate. I will let you know. Thank you //edit1: the flow rate made prints better but the major problem was the shell thickness. The walls are ok now. edit2: i have another problem now. I cant level the bed. The z-axis is shifted or something because when i set my z to 0 and my nozzle is in correct position on every 4 corners the print is just mess. The nozzle is too high. eby P4d0uch - Printing
I was not clear. I calibrated the x,y, and z axes and the extruder steps too, but I dont know where to find the extursion width in Cura. I found that these two parts should fit in each other. But the smaller one is way bigger then it should be. I have got this printer with 0.7 nozzle. Btw the top layer is fixed when I use Curaby P4d0uch - Printing
I've got the printer for 4 days. It needs some calibration. Ok i will try cura. Thanksby P4d0uch - Printing
As you can see on the pictures the prints are unfinished and i can see the infill. Can someone tell me what is wrong with my settings? I use Repetier-host and Slic3r 1.1.7. Thanks for any suggestionby P4d0uch - Printing
Super to jsem rad diky za odpoved.by P4d0uch - Hotendy a hlavy
Ahoj. Nedavno jsem si koupil pouzitou tiskarnu. Je to zvetsena verze prusi mendel tuhle. A chtel jsem se zeptat jaky hotend na 1.75 filament bych tam mohl nainstalovat. Zaroven bych chtel o neco mensi trysku nez 0.7 ktera je tam ted. Jde mi o to aby elektronia co ted mam spolupracovala s novym hotendem. Edit: jeste dodam ze mam bowdenovy extruder takze si myslim ze 1.75 filament bude vyhodnejsiby P4d0uch - Hotendy a hlavy