Quotedmould Quoteormerod168 Oh now I see what you mean! (I'm a bit slow ;-)), Its designed so to give the nozzle access to the whole bed - notice the tip of the nozzle has a 35mm offset to the edge off of the Z extrusion, so that makes the position of the nozzle 210mm-35mm=175mm - exactly in the middle of the Y extrusion Erik Quite so. If you position it in the wrong place, the printer will stiby xiandhq - Ormerod
Quoteormerod168 QuotexiandhqThank you very much for your replying .But why it is 210mm+20mm+120mm=350mm,not 180mm+20mm+150mm=350mm? Is it because of printer's structural design? Oh now I see what you mean! (I'm a bit slow ;-)), Its designed so to give the nozzle access to the whole bed - notice the tip of the nozzle has a 35mm offset to the edge off of the Z extrusion, so that makes the positionby xiandhq - Ormerod
Quoteormerod168 Quotexiandhq Hi,everyone. I don't really understand that why the Z extrusion will sit between these two marks?... The Z extrusion is 20mm on the short side so it all ads up to the total length of the Y extrusion, 210mm + 20mm + 120mm = 350mm Erik Thank you very much for your replying .But why it is 210mm+20mm+120mm=350mm,not 180mm+20mm+150mm=350mm? Is it because of printer'by xiandhq - Ormerod
Hi,everyone. I don't really understand that why the Z extrusion will sit between these two marks?(on the Y axis idler side, measure 210mm from the end of the Y axis aluminium extrusion without the Y axis motor and on the Y axis motor side, measure 120mm from the end of the Y axis aluminium extrusion).Thank you in advance.by xiandhq - Ormerod
Quotezombiepantslol Quoteauser Quotexiandhq ... but when I write name of my machine(MyRepRapProormerod2001) in the browser address bar nothing happened. I guess this is too long, try "MyRepRapProorme" as ZPL suggested above (or maybe try MyRepRapProormer (15 / 16 charachters)) Yes indeed, the NetBIOS name is limited to 15 chars (+ terminating zero) in the firmware. Connecting to should work oby xiandhq - Ormerod
Quotezombiepantslol Looks good, but you haven't updated your /www directory yet. Grab a copy of the new web interface from the SD image directory and copy those files to your SD card (you may even use FTP for this). If you want to try out FTP, download FileZilla, set up a new server with that IP address, choose any username you like (anonymous or root for example), enter the password from your coby xiandhq - Ormerod
Quotebartdietrich Hi all, Sorry for butting in but given the subject of this thread I thought this would be the right place to do so. I've also just upgraded to the new 1.09 RepRap firmware and copied all relevant files from the SD-image folder to the SD card (including everything in www). I see and can connect (eventually) to the printer via the new web interface. The printer controls work butby xiandhq - Ormerod
Quotezombiepantslol Try to open [192.168.1.104] - connecting via the NetBIOS/DHCP name is a better idea though, because that IP may change after a while. I opened [192.168.1.104] just now ,but web could not connect with the machine via the local network too.And the web showed Ormerod Control v0.65.by xiandhq - Ormerod
I am not sure that whether I can remove them(M553 and M554 line) from the Config.g file,and the introduction do not say that.by xiandhq - Ormerod
This is the start-up log of your printer.Is it ok? I am in china , Whether related to our network?by xiandhq - Ormerod
Quotexiandhq Quotedougal1957 Quotexiandhq Hi,everyone: I updated my firmware to version 1.09 a.m,The printer worked well with pronterface,but web could not connect with the machine via the local network.what should I do? I also have changed name of my machine as the picture...what should I write in the browser address bar.Thank you in advance. You have to make the default gateway in the M55by xiandhq - Ormerod
Quotedougal1957 Quotexiandhq Hi,everyone: I updated my firmware to version 1.09 a.m,The printer worked well with pronterface,but web could not connect with the machine via the local network.what should I do? I also have changed name of my machine as the picture...what should I write in the browser address bar.Thank you in advance. You have to make the default gateway in the M554 line to beby xiandhq - Ormerod
Hi,everyone: I updated my firmware to version 1.09 a.m,The printer worked well with pronterface,but web could not connect with the machine via the local network.what should I do? I also have changed name of my machine as the picture...what should I write in the browser address bar.Thank you in advance.by xiandhq - Ormerod
刷了一下固件,今天试打印了一下,居然好了,看来真的是原来的0.78b的firmware固件有漏洞,刷成0.78c的就好了。后面有时间了刷成1.04的试试。by xiandhq - RepRap Ormerod China
Thanks,Doctor dc42. I upgraded the firmware ,And my printer do not stop suddenly anymore during working.by xiandhq - Ormerod
Quotexiandhq Quotedc42 If the printer stops at exactly the same place every time when running the same gcode file, that usually means that either you have a bad gcode file or you have hit a firmware bug. Open the gcode file in a text editor and check it is complete. When uploading a gcode file to your printer, make quite certain that slic3r has finished writing it. If you believe the gcode fileby xiandhq - Ormerod
上次出现了打印中途停止的问题,不过几次打印停止都在同一点,最后换了不同版本的slic3r切片就好了,确定是gcode的问题。这次出现同种情况后又换了不同版本的slic3r进行切片打印,但是似乎没有作用,中途还是停止了,不过和上次不同的是这次每次停止的位置都不一样。最后试了好几个版本的slic3r切片打印还是不行,将同样的文件换一台机器居然打印成功了。初步判断不是文件的问题,是机器的问题,去逛了一圈英国论坛,大神dc42说更新一下固件试试,我目前用的是0.78b的,刚才刷成了1.04的。打印的dragon需要的时间太长,看来今天是没办法验证了,等明天早上打印试试。。。期待看到效果。。by xiandhq - RepRap Ormerod China
Quotedc42 If the printer stops at exactly the same place every time when running the same gcode file, that usually means that either you have a bad gcode file or you have hit a firmware bug. Open the gcode file in a text editor and check it is complete. When uploading a gcode file to your printer, make quite certain that slic3r has finished writing it. If you believe the gcode file is complete,by xiandhq - Ormerod
Hi,everyone. My OM2 stopped suddenly when I was printing a dragon.Everything(temperature/fan) was ok,only not moved.At first I thinght that something was wrong with gcode, so I converted STL with slic3r-1.0.1(at the first time I used slic3r-1.1.7),printer stopped at another point.Then I used slic3r-1.2.6,but my printer stopped at another point. what should I do? Help me !!!by xiandhq - Ormerod
大家有没有发现打印大件的时候第一层会出现波纹状,特别是第一层大面积填充的时候,中间的区域会出现波纹状,有的地方还会出现气泡。发现降低喷嘴和提高热床温度后这种现象能改善,但是还是会有。而且这种解决方法的后果就是喷嘴过低,首层会被压的很扁,有的时候过低的话会出现料不能及时挤出,导致挤出机卡顿。大家说说还有别的解决办法吗?by xiandhq - RepRap Ormerod China
以前也出现过”Error 2提示:系统找不到指定的文件“,我一般的解决办法就是:1,将USB线拔掉,电源关掉,然后重新连接;2,检查USB线,换一根试试;3,按reset进行复位,然后连接;我一般采用的方法就是这些,可是这次试了上面的几种方法还是不行。最后只能讲SD卡取出,对SD卡进行格式化,然后导入文件再次插入连接,连接成功了。。。大家有没有遇到过这种情况。说说自己的解决方法。。by xiandhq - RepRap Ormerod China
原来一直用的USB和电脑网页打印,今天试了一下用手机连接,连接上了还没有打印,一会就试试,以后走在路上也可以操控打印了,只要家里的打印机插了网络插口,不管人在哪里都可以操作了。 以后升级加个摄像头随时监控打印画面就更便捷了。by xiandhq - RepRap Ormerod China
打印了几朵玫瑰花,可是溢料严重,不知道是文件本来就有缺陷还是参数设置问题,但是调整了几次,还是不行,大家看看是怎么回事。。。求救大神。。。 白色和红色是别人打印的,比较好,玫红色是我打印的,效果太差了。by xiandhq - RepRap Ormerod China
请教大家一个问题,下面是打印的酒杯,其他地方还好,就是酒杯顶部没有完全封闭,留有一条明显的缝隙。大家帮帮忙。这是原来STL模型文件的问题?还是slic3r参数设置的问题。by xiandhq - RepRap Ormerod China
大家遇到过这样的情况吗?一切就绪后点击打印,pronterface显示无响应,点击无效,最后自动关闭了。试了很多次后还是这样,最后我是将SD卡格式化后,重新导入文件插入后就好了。大家说说自己遇到过吗?是怎么解决的?by xiandhq - RepRap Ormerod China
打印物直径7cm,刚好在热床中央。下面是第二次打印的,在同样的位置出现了问题,第一层没有问题,粘的很牢。出现翘边的位置如下图。by xiandhq - RepRap Ormerod China
这是第一次遇到这样的问题,第一层的时候一切正常,然后就没有注意让他自行打印了,打印完之后才发现背侧的一个角翘边了。 同时还出现了热端温度在150度到185度之间跳跃的现象。by xiandhq - RepRap Ormerod China
以我这段时间自己的摸索,觉得可能是电机接线线序不对或者是电机接线的有些针脚松动。你的机子原来运行正常,基本可以排除线序不对这个原因,你先检查一下接线是否松动。by xiandhq - RepRap Ormerod China
原来一直在用1.1.7版的slic3r,没有用1.2.1版的slic3r,可能是因为1.1.7的是稳定版吧,不过最近喜欢上1.2.1版的slic3r了,特别是它新增的一项功能,XY size compensation这项功能(在slic3r的print settings设置下面右侧最后一项Advanced项中),能对打印部件进行尺寸的微调,默认值为0,正值会放大,负值会缩小,大家可以打印小部件试试体验一下,特别是对部件的孔洞大小调节相当有用。by xiandhq - RepRap Ormerod China