i get a new duet, but the cable of the x-axis had a damage.. But.. the printer print!..by Jack-Lee - Ormerod
Hi, ive get a new Duet.. And!.. nothing.. Dont work?! Could the slicer kill the print?by Jack-Lee - Ormerod
Where i could see such errors by connecting via Pronterface (US ?by Jack-Lee - Ormerod
I reinstall the Firmeware.. So i could move the Extruder manually via Pronterface (when the Hotend was hot). I was happy and start the print.. And then -> nothing. The Extruder dont move againt -_- Same Problem.by Jack-Lee - Ormerod
I check the Wiring, thats ok, i switch the extrudermotor to the x Axis Driver -> the motor work. So the duet is damaged?! Then reprappro is closed...by Jack-Lee - Ormerod
Ok, i tested it again. I couldnt move the extruder manually.. I only think its move (because i move it only 1mm). When the Motors are off, i could turn the Extruderwheel. When i click "extrude" it gets a short "Krrk" Sound (only a few 100ms) and then : nothing. When i whould move the Wheel, the needed force is much higher while motors off. Wiring and Connectors seems ok. In the Error-Data is nby Jack-Lee - Ormerod
Hi, i buy it from "RS Components". The Extruder works about 20-30h. After that, the problem shows more often. Restart/Reconnect helps in the past, but not now. I used Slic3r. All other things works fine (Homing, x/y/z axis, bead and hotend heating). The Extrudermotor not move, but gets "locked", so it needs a lot of strength to move it with bare hands. So i dont think its a wiring error. I coulby Jack-Lee - Ormerod
Hello, i buy a Ormerod2 last year, but since a few month i get a problem with it. The Extrudermotor wont move while print. I start the Ormerod, connect it to the PC and Printerface. When i heat the nozzle up, i could move the extruder with the "extrude" button. But when i load a part and i will print -> the Motor wont move.. Anyone had a idea? Greetings from Germanyby Jack-Lee - Ormerod