En de 3 printkoppen in hun gezamelijke opstelling. Ik heb ze in een driehoek gezet zodat er minder potentieel bereik verloren gaat. Enkel nog een nieuw isolatorlatje maken tussen de houder en de printkophouder. Zodat de warmte niet door de hele aluminium blok word doorgegeven. Aan de achterkant moet nog een extra houder komen met een 2de fan die op het werkstuk gericht staat en deze direct koelt.by Melmie - Projecten
De nieuwe houder waarop nu 3 printkoppen moeten bevestigd worden.by Melmie - Projecten
Thanks for the right connection for the 3-wire z-probe. Looking at your pics i see i'm not the only one that has little room to put the second fan cable on the board. Some connections are made in a wrong direction or components are pushing against the cable holders.by Melmie - Ormerod
De buitenkant, er komen nog enkele stekkers bij die nu los binnen in hangen.by Melmie - Projecten
Thanks zombiepantslol, seems like i forgot to upgrade the firmware, now it works like a charm.by Melmie - Ormerod
Little question on the side. What if i keep using the old 3-wire probe on the shield? RRP only shows the 4-wire on the sheme. There are more things missing in the manual, "The following connections remain to the Duet: Z motor, Y motor, Y endstop, heatbed power and thermistor." No more x-motor in this version?by Melmie - Ormerod
Na alle aanpassingen tot nu toe, zoals een aluminium dwarsas, nieuwe verbeterde z-as, nieuwe bed ondersteuning in messing en aluminium zodat de vewarmde tafel gemakkelijker waterpas blijft staan. De nieuwe tandwielen van dc42 (geloof ik) voor zowel z-as als filament aandrijving zijn ook een verbetering. Het leuke is dat alles zelf gemaakt is en ik niets ben moeten gaan kopen. Mijn volgende stap iby Melmie - Projecten
Looks like there is a standard password set in the new web control? Previous it was 'reprap', did it change?by Melmie - Ormerod
Quotejstck but it is by a small amount. Every little bit helps to make a big oneby Melmie - Ormerod
Strange, my psu isn't that noisy. The cooling on the extruders is way louder Just look at the dB when making your choise. Also i just tested the max. watt. ormerod is using (for placing a UPS in between) and it's with the bed warming up and 1 extruder warming up around 300W. When temperature is reached 150W. So make sure the new psu supplies enough. And that it has a good 'efficiency' (or how dby Melmie - Ormerod
Looks a lot more solid now. I see your still using the acrylic arms. How's that working for you? I never really used it, I directly manufactured an aluminum one.by Melmie - Ormerod
Quoteepninety don't buy cheap carp off of ebay Hehehe funny but true.by Melmie - Ormerod
Quoteepninety It might give you some ideas. Just looked at your post. tr8x1.5 will do the job just as good indeed. Not sure if the step size is easy to work with? 0.0075mm Quoteepninety he bronze nut has some serious backlash Strange, i have almost no backlash. Nut is made with a H7 allowance. And also like said in your post, the weight off the arm compensates that effect. My arm weighs aroundby Melmie - Ormerod
QuoteZeb00 i dont run any bed or orth comp Thats indeed the best way. Hear a lot off people who destroy there threaded rod because they use the bed compensation. 0.01mm was also what i was thinking the step should be now. Don't think anyone is going to make smaller steps than that. I work with a professional printer at work and the smallest z-step is 0.01. And usually i don't go bellow 0.03 orby Melmie - Ormerod
Yep, just go for it it works great. And i can't complain about precision. Still more than you need. I hope you have the 2mm thread. Was hard to find here. Standard seems to be 3mm and that is to much i think.by Melmie - Ormerod
Thats only a problem in a perfect world Zeb00. Every ormerod owner has to tighten the X-belt. And your drawing shows the motor in his farthest position to the right. So if you put tension on the belt and the engine moves 1mm to the left the tr10x2 fits like it's made for it. Also, the drawing is not correct i see, the allu back and front plate off the motor stick out a bit more than the black parby Melmie - Ormerod
Like many people know the standard M5 Z-rod is not that great quality. I don't use bed compensation and still the rod shows traces of wear. I found an alternative , buttress screwthread. TR10x2 (so thread is 2 instead off the standard 0.8) in steanless steel and with a bronze nut. (thats the only good combination when u use the rod for an automated dynamic movement, steel on steel will allwaysby Melmie - Ormerod
QuoteOhmarinus Dus ik dacht dat het een soort supermateriaal was (wat het ook is), en ging op zoek naar een metaalbewerker die het voor me wou zagen. Enfin, ik een paar bedrijfjes gebeld, niemand wou dat dus doen voor me, ook niet tegen betaling. Als je nog eens zoiets voorhebt, zoek dan naar een bedrijf met een draadvonker. Wij snijden ermee door messing, koper, aluminium, snelsnijstaal, widia,.by Melmie - Algemeen
Ik heb de web interface uitgeprobeerd. Alles was vrij simpel en via google chrome opende de interface direct. De verbinding werd ook heel snel gemaakt. Enkel met doorsturen van programma's zijn er problemen, dan crasht de webpagina. Dit wou ik oplossen door de laatste interface versie binnen te laden maar nu opent de webpagina zelfs niet meer. Geen verbinding mogelijk via het ip adres. Firmware vby Melmie - Software
Hier al enkele shots in jpeg Eerste is het extra latje dat ik gemaakt heb zodat de extruderkop lager komt en de z-probe het geprinte deel niet terug van de tafel kan schrapen. Tweede is wanneer het op zijn plaats zit. Volgorde is vanonder naar boven: het origineel plaatje. de isolatie, het extra plaatje Derde is ééntje van de klemming onder de tafel zodat die vast blijft hangen aan de rollager.by Melmie - Projecten
@P4tje: komt in orde, zal bij de volgende eraan denken een ander formaat te nemen. @Jonnie: Eigenlijk heb je gelijk, zal een mailtje sturen naar reprap, want die maken zelf de pakketen voor RS components. Machine staat al in elkaar, software draait en de printer ook. Ik heb nog niets (volledig) geprint omdat de extruderkop blijkbaar net iets minder diep hangt als het blokje waarop de proximity sby Melmie - Projecten
Het pakket is aangekomen. Ziet er alvast leuk uit. Tijdens de eerste stappen van de bouw bleek al snel dat de x-plate en x-rib niet erg stevig zijn. Die zijn gemaakt van plexi of acryl, dus die heb ik al ineens opnieuw gemaakt uit 5mm dik aluminium. Hiermee is de verbuiging herleid tot 0. Volgende stap is het bed en de elektronica, hier zal ik ook nog een onderdeeltje moeten maken want ik mis deby Melmie - Projecten
Opbouw van de machine ziet er alvast heel degelijk uit, heb je al een idee van de specificaties? Of wat je zou willen bereiken? (bereik, nauwkeurigheid,....) Alvast mooi werk.by Melmie - Projecten
Wow, knap project. Ziet er heel I-robot achtig uit Ben benieuwd naar de volgende stappen.by Melmie - Projecten
Zojuist de reprap ormerod besteld. Ik verwacht er enkele avonden aan te besteden voor het in elkaar knutselen. En daarna eens zien welke onderdelen ik ga hermaken in aluminium om mogelijk de stabiliteit en nauwkeurigheid de hoogte in te jagen Als iemand al weet welke onderdelen ik zeker onder handen moet nemen,..... laat maar horen. Grtz, Mel.by Melmie - Projecten