Ah thanks guys! Its hard to find resources for this specific printer so this is much appreciated! I'll post some pics if I can get it workingby jcaz76 - Delta Machines
I might be able to help with this! Reply to this and attach your Configuration.h fileby jcaz76 - Reprappers
Hey Guys! I am having a bit of a problem calibrating my printer. I have the *G1 Z0 Fxxxx* homed in, but when I input something that would bring the head away from the center of the print bed towards the edge of the bed (such as *G1 X50 Fxxxx*), the head gets closer to the bed as it goes out and scrapes the bed. To simplify, the closer the head is to the edge of the bed, the closer it is to the bby jcaz76 - Delta Machines
Thanks! Worked great! I can't seem to figure out anything about the autolevel. It said that it came with it, but there are absolutely no instructions on the web about it! Do you know of any instructions or how to set it up?by jcaz76 - Reprappers
I finished building and tuning my printer, but I noticed that the bed is uneven because one of the plastic pieces is warped. I'm guessing that the autolevel will take care of this, but I cannot find any information on how to use the autolevel! help!by jcaz76 - Reprappers
Hey all, So I successfully got the printer put together. I am in the process of doing the G28 command followed by the G1 Z50 F4000 command to get the printer head to pinch a piece of paper on the heat bed. The second command works to lower the head 50mm above the bed, but it will not respond when I put in a negative number. It looks like it just goes to 0mm when I put in -3. Here is a sample commby jcaz76 - Reprappers