@chicky and @Ano. thanks for your reply, guyz i decided to make my extruder fan on and off manually using M106. And, for heatbed slow temperature, i made it to reach 110C in 13 minutes adding extra plane under heatbed. Yeah. i read thru this topic and found out some guyz reported about extra plane. my extra plane is made from a folder hardcover, foam/rubber-like heat insulation tape and alumiby repramon - Prusa i3 and variants
Updating my own questions. Quoterepramon ... 1. What is home? Is it position where printer starts? i have followed Tech2c's this post. So my home is where X=200, Y=0, Z=0? Does that mean HE should be placed lower right corner and HB should be placed to backward side of printer? ... Nevermind. I figured out it. Homing is positions where my endstops are. Quoterepramon ... 2. If i manually move Hby repramon - Prusa i3 and variants
Quoterepramon ... 4. Whats are those for? ... Updating my own question. Those are maybe for motors? (because screwing is not tight enough) Anyway those couple holes are matched with of motors.by repramon - Prusa i3 and variants
Quotechicky Wow, it seems my post from July 4th weekend never posted…I must’ve been in too much of a rush to get out and shoot fireworks! Ano, BlueIce, clone: this post from July 4 had a detailed breakdown of my problem and how your input helped my find the solution. I wanted to thank you for the help! ... repramon: Question 2: I believe this is fiberglass. That’s what Replikeo tells us anywayby repramon - Prusa i3 and variants
Quotepsneddon Some boards have the connector pins soldered to the board and some don't. After I finished my build I noticed my Ramps 1.4 board didn't come with the connector either. I didn't want to solder the wires to the board since I already had everyhting plugged in and running, so I ended up stripping the wires and hooking them up to the D9 plug on the Ramps board. I have been printing fby repramon - Prusa i3 and variants
hi everyone. this thread is like unofficial prusa i3 rework (replikeo). Thanks for it. yeah. i just bought one from same vendor and assembling. very new to this field and got somethings to clarify. 1. There is a fan which cools extruder. Confused about its wiring. In wiki (Prusa i3 Rework Electronics and wiring), it says you can plug your extruder fan wires to 2 empty holes next to X axis driby repramon - Prusa i3 and variants