Can't be sure it's the same thing but i had the same error for a megatronics v3 board with everything seemingly configured right. A month or so after i went to have it looked at and the guy just grabbed the latest marlin and it worked so could be something in the marlin version messing with the temp sensors but i can't be sure. did you get the newest version?by Ashaira - Prusa i3 and variants
Quoteseabass07 What temp is the extruder at? the cube i made with the ramps board was done at 190 (pla obv). the 3 horrible cubes you see were done at 210 and 190. when i use repetier and tell the printer to extrude the material comes out fine at the width you would expect from a 0.4 mm nozzle (it's an edi full metal nozzle as i was planing on trying the bronze filament from colorfab later on).by Ashaira - Prusa i3 and variants
Quotepaulhurleyuk You mention calculating the steps/mm for your axis, but those are just the theoretical values. I would recomend following the concept in Triffid Hunters calibration guide and measure the start position, move the axis a set distance then measure how much it actually moved, for all axis (x, y, z and extruder.). Then adjust the steps/min value using the formula new steps/mm = olby Ashaira - Prusa i3 and variants
After finally fixing a fuse i'm back to trying to calibrate my prusa i3. The problem is i've been trying to for about a week with no visible improvement on the print objects. A bit of backstory. When i bought the printer the guy who assembled it for me gave me a ramps 1.4 until my megatronics board arrived. This is what a cube i printed with the ramps board looked like As you can see while it wby Ashaira - Prusa i3 and variants
Closed. Figured out the fuse was blown............by Ashaira - Prusa i3 and variants
Hello everyone. I'm hopping someone can help me with a less usual problem. I bought a prusa i3 but with some upgrades over the basic kit. For the board i got a megatronics 3 board as i intend to get a diamond hot end after i get comfortable printing. I had the printer assembled and everything worked calibrations excluded. I spent about 2-3 days playing around with the calibration parameters (sby Ashaira - Prusa i3 and variants