Yep it was my thermistor. now the my nex issue is my firmware doesn't show my extruder active. any idea how to do this?by Zeegzeigler - Prusa i3 and variants
Hello anyone know how to activate a extruder in adruino? when i start repetier it says active extruder :0by Zeegzeigler - Prusa i3 and variants
alright ill order the thermistor and heater. just sucks I have had it for a month and haven't got a single print. ill ask someone to unplug their thermistors and see what it does for. them. do you think it's a good chance it's the board again or no? thanks.by Zeegzeigler - Prusa i3 and variants
thanks for the reply. it recently worked thought is why im confused nothing has changed besides the boards. the thermistor shouldn't make it not move right? oir would it? the mega is a chinned knock off if that matters. im guna try to go back to my original megaby Zeegzeigler - Prusa i3 and variants
Okay guy's i thought i was free and clear had everything moving correctly,homing,etc. then i was adjusting my v on my steppers(first time with a multimeter) and i killed the board. since then i have ordered 1 new board ramps and adruino. they all worked,but eventually started getting errors. now i can't do any type of movements. I have tried lowering the steppers and hiring them and still errorby Zeegzeigler - Prusa i3 and variants
QuoteMach QuoteZeegzeigler QuoteMach QuoteZeegzeigler QuoteZeegzeigler Move your X and Y endstop connector one place to the left on the ramps board. The printer will not move until you homes it. If the endstops are not setup properly, the printer will hit them, and then keep trying to move in that direction since it will never get the signal to stop. If you ever want to move your endstops, lookby Zeegzeigler - Prusa i3 and variants
QuoteMach QuoteZeegzeigler QuoteMach QuoteZeegzeigler Also i have other issues like sometimes in manual mode it doesn't move a certain way until I home it,and slams into whichever way i send it end. even then sometimes it still wont move. also the nut for the z axis keeps coming out. i should kept my da vinci XD jk...sorta. i would appreciate any help. To have your endstops in the back, right, aby Zeegzeigler - Prusa i3 and variants
QuoteMach QuoteZeegzeigler Also i have other issues like sometimes in manual mode it doesn't move a certain way until I home it,and slams into whichever way i send it end. even then sometimes it still wont move. also the nut for the z axis keeps coming out. i should kept my da vinci XD jk...sorta. i would appreciate any help. To have your endstops in the back, right, and bottom, copy and paste tby Zeegzeigler - Prusa i3 and variants
Also i have other issues like sometimes in manual mode it doesn't move a certain way until I home it,and slams into whichever way i send it end. even then sometimes it still wont move. also the nut for the z axis keeps coming out. i should kept my da vinci XD jk...sorta. i would appreciate any help.by Zeegzeigler - Prusa i3 and variants
QuoteZeegzeigler QuoteZeegzeigler QuoteMach QuoteZeegzeigler Hey guys,I'm having a few issues. at the moment I just want to get printing so i can figure everything else thats wrong haha. right now my x,z endstops do nothing,but light up also I cannot home. im new to the building aspect. I had a davinci,but wanted a more upgradable printer. here is my config i need help with. thank you in advanceby Zeegzeigler - Prusa i3 and variants
QuoteZeegzeigler QuoteMach QuoteZeegzeigler Hey guys,I'm having a few issues. at the moment I just want to get printing so i can figure everything else thats wrong haha. right now my x,z endstops do nothing,but light up also I cannot home. im new to the building aspect. I had a davinci,but wanted a more upgradable printer. here is my config i need help with. thank you in advance. let me know ifby Zeegzeigler - Prusa i3 and variants
QuoteMach QuoteZeegzeigler Hey guys,I'm having a few issues. at the moment I just want to get printing so i can figure everything else thats wrong haha. right now my x,z endstops do nothing,but light up also I cannot home. im new to the building aspect. I had a davinci,but wanted a more upgradable printer. here is my config i need help with. thank you in advance. let me know if you need anythingby Zeegzeigler - Prusa i3 and variants
Hey guys,I'm having a few issues. at the moment I just want to get printing so i can figure everything else thats wrong haha. right now my x,z endstops do nothing,but light up also I cannot home. im new to the building aspect. I had a davinci,but wanted a more upgradable printer. here is my config i need help with. thank you in advance. let me know if you need anything else. // corse Endstop Seby Zeegzeigler - Prusa i3 and variants
QuoteGrouchoDuke I've been mostly a lurker here, but I finally ordered a 2020 kit yesterday. Besides the printer, I also ordered a 12864 LCD, borosilicate glass bed, BuildTak, a set of linear bearings from Misumi, a BLTouch sensor, and some PLA, ABS & PETG filament. I also have a Raspberry Pi that I plan on messing around with Octoprint. I'll probably pick up Simplify3d soon too. Hopefully thby Zeegzeigler - Prusa i3 and variants
First time posting,just ordered the 2020. Does anyone know why it takes so long to ship? I know there was just a holiday,but I paid the 28th shipping label created the 29th and it still hasn't moved. I paid for 2 day shipping,and ideas? Are the kits not already put together? I'm not trying to be a butt just was curious Hope you guys/gals look forward to my upcoming I have no idea questions myby Zeegzeigler - Prusa i3 and variants