The issue with attachments is it tells me file is too large when I try to attach. 614kb allowed. Will make those new adjustments today when I get back from work. Thanks Just to let you know the printer has been printing very well for 6 months now, just mirrored which I didn't notice on 95% of the prints. PM your email or text I will send you pics of the ramps Thanks for your helpby Ares2189 - Prusa i3 and variants
here is my config.h #ifndef CONFIGURATION_H #define CONFIGURATION_H // This configurtion file contains the basic settings. // Advanced settings can be found in Configuration_adv.h // BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration //User specified version info of this build to display in terminal window during startup. //Implementationby Ares2189 - Prusa i3 and variants
Ok here is a pic of my ramps. Will post my con.h file in a bit. Edit: it won't allow me to post a pic.by Ares2189 - Prusa i3 and variants
Ok, I adjusted the code in my configuration.h file. Now my extruder is printing off the bed. Is there a way to readjust it's positioning? It is trying to print off the bed. When I kill print it would usually park it self in the center back position. Now when I kill the print it is parked off center. I tried to change the code back to its original form to see if would go back to how it was orby Ares2189 - Prusa i3 and variants
Im having an issue with my printer. all my prints are coming out good however they are being printed in mirror image. if the print is the same on left as it is on right the print will come out perfect. its hard to explain, say you have a mickey mouse figurine that you want to print. For some reason you want mickey's right ear to be larger then his left ear. my print will come out with his lby Ares2189 - Prusa i3 and variants
has anyone successfully printed with ninjaflex with stock i3 2020?by Ares2189 - Prusa i3 and variants
Yes i followed all the steps no issues downloading the Marlin ramps and the abs, pla zip files. uploaded the marlin ramps to arduino. I did the whole process over and noticed a couple differences. 1. my com port says : com4 (arduino/genuino mega or mega 2560) 2. step 5 says to choose Arduino mega 2560 or mega adk. My board list has it the same as my com port says. and on a differentby Ares2189 - Prusa i3 and variants
baud rate is at 250000. is that correct? yes that article is what came up when i searched these forums. im trying a different comp now will see if it worksby Ares2189 - Prusa i3 and variants
printer wont connect to rep host. i keep getting this log message: No start signal detected-forcing start Any help would be appreciated. i have searched here but unable to find anything helpful. only thing that might be relevant is maybe it is a clone ftdi chip and computer wont recognize? Thanksby Ares2189 - Prusa i3 and variants