Yep i understand, between infill and accelleration should give that much difference... Thanks.by oinquer - Prusa i3 and variants
Hi guys, A doubt... If i print a rectangle 50x50 with 10 mm height it takes less time than a rectangle with 50x10 with 50mm height?? Its the same object just rotated? Same volume...do the z moves really take that much time?? Sometimes its less than half time...by oinquer - Prusa i3 and variants
Back to this after a couple weeks, i'm gonna let this end and blame filament. After all tests and stuff verified from our talks, i tried to print some stuff with a bit filament i had from other good vendor and its printing much better, with this filament (BQ filament) although its a bit better than initially its still bad., already ordered new reel for my original vendor and will try again to veby oinquer - Prusa i3 and variants
i always have a 2 loop skirt around my piece, and its more than enough since the last loop is always perfect. my steps are well calibrated, did the math and got a few confirmations around the webs, after printing at 1.4 i seen too much overextrusion, now will try at 1.25, im pending back to the filament maybe being the culprit, look at this: in the photo its all bent instead of round, and the rby oinquer - Prusa i3 and variants
Ok... changed ptfe and nozzle (although nozzle is a cheap ebay chinese), checked drive gear good, idler good. still crappy extrusion Now i increased extrusion multiplier to 1.4 and its much better, not good but decent ... So, i got 2 last things, nozzle which i ordered one new, and a motor, also....could be filament, gonna order a roll from my original seller. one thing i also don't know its tby oinquer - Prusa i3 and variants
Hello, i have a Sintron prusa i3 which i have been using for the last couple months, Over the last weeks it has given me headaches with the extruder which i cant pinpoint the failure. in the pics you can see the first layer which almost doesn't print, but if i let it run the print ends up decent....only fails a bit when head moves to new position to extrude. Been trying different temps, from 1by oinquer - Prusa i3 and variants