Yeah the TMC2100 are running in spread cycle. The belts were last balanced a month ago using a Gates Digital Belt Guage.. Both are around 42hz. I can check it again. Do I need to address this in the firmware? Best, Brandonby brand0drag0 - CoreXY Machines
I have a really great CORE XY build but it is just a little bit off on this calibration cube. What do I adjust to get this dialed in. One of my axis is dead on 30mm and the opposing axis is off. Do I need to adjust the steps per mm of my core xy motors ? I have tried adjust extrusion and scale compensation but it appears to be an issue specifically with just one of the axis. Any light anyone canby brand0drag0 - CoreXY Machines
Here's the problem I'm seeing from Marlin: When attempting to home all axes, whether AUTO_BED_LEVELING_FEATURE is enabled or not, on RC3: the machine homes X, homes Y, then stops. on RC2: the machine homes x, homes y, then rams the bed into the head (ignores the z-sensor completely). I am using an AZTEEG X3 PRO board with CORE XY motion. Thanks for any help or insight anyone can provide. Iby brand0drag0 - Firmware - Marlin