You should not comment that out I guess. The pins_MKS_SBASE.h already defines that properly. // // Heaters / Fans // #define HEATER_BED_PIN P2_05 #define HEATER_0_PIN P2_07 #define HEATER_1_PIN P2_06 #ifndef FAN_PIN #define FAN_PIN P2_04 #endif Have you set your target board to // The following define selects which electronics board you have. // Please choose the naby p-r-o-m-e-t-h-e-u-s - Firmware - Marlin
I've also a SBase running (but not delta). Both fans run like a charm with Marlin 2.0 e.g. Extruder fan #define E0_AUTO_FAN_PIN P2_06 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 196by p-r-o-m-e-t-h-e-u-s - Firmware - Marlin
Hi, I'm using the latest github branch [2.0] and I have added the following config: #define USER_DESC_1 "Light on/off" #define USER_GCODE_1 "M118 A1 action:light" While the config works fine and the menu item is selectable, the M118 command is not forward to the serial interface. So hosts like octoprint won't act on that. It seems that these user defined command are only internal processed.by p-r-o-m-e-t-h-e-u-s - Firmware - Marlin