With repetierhost it works. But with pronterface it doesn't work. This comes from pronterface which misinterprets the startgcode (attached).by giandiosos - Printrun/Pronterface
I use Pronterface and repetierhost to print. In pronterface (but not in repetierhost) after gcode 28 (homing) and g29 (leveling) the heating commands do nothing. The carriage remains motionless waits approximately 1 minute and acts as if the heating commands have been completed and prints. There may be a track because for a test I launched the code M320 which allows cold printing. But since andby giandiosos - Printrun/Pronterface
Thank you for answering. Sorry G28 and G29 work well. It is the heating that does not work. I am creating a new post.by giandiosos - Printrun/Pronterface
I use Pronterface and repetierhost to print. With pronterface the gcode 28 (homing) and g29 (leveling) no longer work. The carriage remains stationary and after a moment of at least 1 minute it begins to print as if the temperature had been reached. There may be a track because for a test I launched the code M320 which allows cold printing. But since and after having left and relaunched pronterfby giandiosos - Printrun/Pronterface
It is true that I do not have much experience but I am learning. I understand that everything is based on the parameters specific to each machine. Also I have adjusted for each axis speed, steps / mm, heat of more or less empirically to finally settle the last problem which was a problem of speed of movement and steps / mm of the extruder. Now everything is set Thanks for your intervention.by giandiosos - CoreXY Machines
Thank you ruggb I resolved the dimension issues #define DEFAULT_AXIS_STEPS_PER_UNIT {180.5,180.5,960,92.599318} #define DEFAULT_MAX_FEEDRATE {500, 500.75, 25} But now I have walls that barely hold together and look like coarse lace full of holes. I think to act on the extrusion speed by increasing DEFAULT_MAX_FEEDRATE and / or DEFAULT_AXIby giandiosos - CoreXY Machines
Hi, My problem is a wrong Z axis dimension. Instead of printing a height of 20mm it prints a height of 8.50!? ... X and Y are correctby giandiosos - CoreXY Machines
I built a coreXY printer controlled by Marlin-1.1.8 and pronterface or repetierHost. I've been struggling for days to find the solution to problems that keep me going in circles. I would like to have a configuration.h that works in order to adapt it to my machineby giandiosos - Firmware - Marlin
I built a coreXY printer controlled by Marlin-1.1.8 and pronterface or repetierHost. I've been struggling for days to find the solution to problems that keep me going in circles. I would like to have a configuration.h that works in order to adapt it to my machineby giandiosos - CoreXY Machines