uups, that coms from to mutch calculate and the prerequisite of false facts. i am sorry.by 3D-Freak - Firmware - Marlin
Hello, 1. you have 1 gear with 20 teeth and 1 gear with 16 teeth with 2mm pitch, so when your motor makes 1 360° turn, your second gear have 450° ! calculate 100mm with 2mm pitch config: 80steps/mm *100mm = 8.000 steps | Q1 what is real mm so what we calculate ? if we calculate 100mm with 2mm pitch like above then 8000steps / 160steps /r = 50 360° revolutions but on second gear you have 450by 3D-Freak - Firmware - Marlin
with BTT GTR v1.0 and M5 board and Marlin 2.0.5.3 you can have XYZ and 8 additional axis/tools.by 3D-Freak - Firmware - Marlin
Hello, Motor step angle = 1.8° Micro steps @ 16 (8/16/32/64) Pitch 2mm (20 teeth / 16 teeth = 1,25) = 20*1,25 =25 teeth 360/1,8 = 200 steps * 16 micro steps = 3200 / (25 (teeth) x 2 (mm pitch) = 50) = 64 may this helpsby 3D-Freak - Firmware - Marlin
Hello all, i have problem with stepper motors. X= single, Y= dual, Z= quad stepper X is working fine, Y the steppers changes directions and drive also in different direction Z 2 steppers working fine, 2 steppers struggle. All have TMC5160 with SPI All steppers @ steps/mm = 6400, Feed Rate mm/s= 600, Acceleration change = mm/s= 1000 X_CURRENT=1620 (normally 2,1A * 1,41 = 2,960 but then the mby 3D-Freak - Firmware - Marlin
update on my octo-print system (win10) Octoprint (1.4) for windows: i installd pyhton for win 3.83. then followed this DL Marlin-2.0x + release 2.0.5.3 and bugfix-2.0.x unzipping all then copy all file in Configurations-release-2.0.5i to Marlin-2.0x folder, after then Marlin-bugfix-2.0.x folder too. override all files. then you need the Marlin-2.0x\Marlin-BTT-GTR-V10\buildroot\share\Platfoby 3D-Freak - Firmware - Marlin
Hello, have you experience in Marlin 2.0 ? here are may are what you search for. hope it helps.by 3D-Freak - Firmware - Marlin
Hello, first QUEST Printer ? Slicer ? in Cura you can set a script for each level (high / printlayer) like bedtemp set layer 00 - 50 temp = 60° bedtemp set layer 50 - 200 temp = 50° and some other cool stuffby 3D-Freak - Firmware - Marlin
Hello, do you have Win10 with vscode and platformio ? if you want to make like new installation don't forget c:\users\Your user\.platformio (phyton and some source like stm32 -- c:\users\Your user\.platformio\platforms\ststm32) also don't forget to upgrade phyton cause of folder name depht problem.by 3D-Freak - Firmware - Marlin
Hello, i am not really know your board, but may like mine you must set RST and SLP Note: if you are using A4988 or DRV8825 driver, you must connect RST and SLP with jumper cap.by 3D-Freak - Firmware - Marlin
sorry here the youtube linkby 3D-Freak - Firmware - Marlin
Hello, are you set the jumper for TMC2209 to UART or SPI ? SKR 1.3 and 1.4 are like the same set this guy know what he is doing !by 3D-Freak - Firmware - Marlin
Hello, only make from #define Y_DUAL_STEPPER_DRIVERS //#define Y_DUAL_STEPPER_DRIVERS thats allby 3D-Freak - Firmware - Marlin
Hello all, i hope you are all healty. May somebody can help me. HW: Board BigTreeTech GTR V1.0 | M5 Board | 11x TMC5160 v1.2 | TFT35 E3 V3.0 Stepper 5X 17hs24-2104s (4x Z-Axis / 1x X-Axis) | 5x 17hs19-2004s1 (2x Y-Axis 3x Extruder) Mainpower 24V 41.6A (1000W) Marlin 2.0.53 Problem 1: with Original FW, motor not working correct, just make noise like a loud krrrkrrkrrkrrrkrrrr Marlin 2.0.(5by 3D-Freak - Firmware - Marlin