I gave up! Too much work, too little return! Rumor has it that a chip was substituted for production that is not happy with Marlin 2.0. I do not know that for fact, so take it for what it is worth. I have nothing against BTT but their product support did not even answer my requests for information. Both my boards were quality built and finished, they just would not work beyond the LEDs lightingby jobob64 - Firmware - Marlin
Thanks Dust, I'll give it a try when I get back from work tomorrow. It is so easy to miss some of these little details! I sure hope that I can get the machine working again. Thanks again, jobob6464by jobob64 - Firmware - Marlin
Continuing on the "Saga of building Marlin Bugfix 2.0 into a BTT SKR-2 Board with a TFT35-3. I have managed a successful build according to Marlin Auto Build I copied the firmware.bin file, changed the name to: firmware.CUR and copied it to a freshly formatted 8gig sd card and inserted it into the sd slot on the board I verified that my board is indeed a Revision B board I energized my printer anby jobob64 - Firmware - Marlin
Dust, thanks for trying to help. I went over configure.h and configure_adv.h and check all my entries again. I copied the motherboard name in board.h file and reentered it into the Motherboard line 142 in the configure file and then recompiled again 2 times with the same error. The error in red stated that I gave the wrong value for the motherboard and that the motherboard is "unknown". Mayby jobob64 - Firmware - Marlin
I have changed the serial port to 2_1. I attempted to compile marlin bugfix2 for the BIG TREE Tech SKR-2 board 3 times but failed because Auto build Marlin and platformio did not recognize the board. I copied and pasted the board name from the board.h file that was closest to BTT SKR-2 which was the revision B board because I could not find the SKR-2 board listed. No.luck! Has anyone been suby jobob64 - Firmware - Marlin
Thanks Dusty, I was using serial port 3 out of confusion so I will correct that in my next Marlin Auto Build. If I am unable to succeed with the build, I will attach the files and ask for more help, Thanks again, jobob64by jobob64 - Firmware - Marlin
Hello all, I need help with my setup of a Big TreeTech SKR-2 and a Big Tree Tech TFT35-E3 V3 touch screen. I have spent countless hours digging through various sites, viewing many Youtube Videos and Creality CR-10 documents with still no success, Can It be that hard?, well for a 79 year old non-programer , (maybe ! ). I started with a fresh copy of Marlin Bug2.0 , changed the configure.h and coby jobob64 - Firmware - Marlin