This worked. I thought there were 6 steppers. I didn't realize the 2nd Z went to the E1. Thank you for all of the help!!!!by ddrielts - Firmware - Marlin
I'm confused as to why the 2nd Z stepper is set up as E1. I didn't change this. There is a designated driver for that stepper. I have attached the board schematic. The E1 should be unused unless you have duel extruders. Unless I am not understanding it correctly.by ddrielts - Firmware - Marlin
That allowed it to compile. The axis are not moving correctly though. When I move the axis listed the result is as shown- Z- left Z and Y. And the Bed is chattering terrible like it did when hooked up to the original driver Y- Only moves the right Z X- Works perfectly I'm ready to just order another board. I'm sure you are as frustrated as I. I apologize for the time you've invested.by ddrielts - Firmware - Marlin
It looked like it was compiling. Then I received these errors- Compiling .pio\build\LPC1768\src\src\module\settings.cpp.o Compiling .pio\build\LPC1768\src\src\module\stepper.cpp.o Compiling .pio\build\LPC1768\src\src\module\stepper\indirection.cpp.o Compiling .pio\build\LPC1768\src\src\module\stepper\trinamic.cpp.o Compiling .pio\build\LPC1768\src\src\module\temperature.cpp.o Compiling .pio\buiby ddrielts - Firmware - Marlin
Sorry. dumb question.by ddrielts - Firmware - Marlin
#define MOTHERBOARD BOARD_BTT_SKR_V1_4 //#endif This endif was not commented out. Could you tell me where else to look?by ddrielts - Firmware - Marlin
I apologize. Copy, paste doesn't seem to work.by ddrielts - Firmware - Marlin
Deleted the directory you specified. It did reinstall on startup. Attempted another build on had these errors. Again, thank you for the help.by ddrielts - Firmware - Marlin
Attached are the errors that are preventing the build.by ddrielts - Firmware - Marlin
Thank you for the reply. I did change those. The problem I was having was that it wouldn't build in VScode. I kept getting errors.by ddrielts - Firmware - Marlin
Hi all, Wondering if anyone could help me with Marlin configuration. I'm trying to upgrade the board on my MK3s bear to a BTT SKR 1.4. There is something wrong with the port for the Y axis. It just chatters and doesn't want to move. I switched to the X axis port on the board and it works fine. So what I'm trying to do is switch the Y axis pins to the E1 pins which aren't being used. I made the aby ddrielts - Firmware - Marlin