Use Sanguish
Sanguish Electronics Board
Release status: working
Description | All in one electronics with Toshiba drivers
|
License | [GPL]
|
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | |
External Link | (none)
|
Sanguish Home ----- Build Sanguish ----- Firmware for Sanguish
Warnings !!!
Never insert or remove drivers while the board is powered.
Don't plug or unplug stepper motors while the driver 12V is on. You can plug or unplug steppers if the board is powered as long as the 12V driver relay is off. (As shown by the indicator LED near the relay.)
Software Setup
Conections
Older Beta files
File:Sanguish Beta Cheat Sheet.pdf