Wilson II BOM
Hardware
Item | Quantity | Notes |
2020 Aluminum extrusion, 500mm | 4 | |
2020 Aluminum extrusion, 400mm | 4 | |
2020 Aluminum extrusion, 330mm | 3 | |
M10 Smooth Rod, 500mm | 2 | |
M10 Smooth Rod, 370mm | 2 | |
M10 Smooth Rod, 320mm | 2 | |
8mm lead screw, 300mm | 2 | |
GT2 timing belt, w=6mm | 2 meters | |
GT2 pulley | 2 | |
M5 x 10mm machine screw | 55 | |
M5 t slot nut | 55 | |
M4 x 10mm machine screw | 4 | These are used for the psu mounting bracket |
M4 x 20mm machine screw | 4 | For belt idlers and tensioners |
M4 x 25mm machine screw | 4 | These are used to mount the extruder to the X carriage |
M4 hex nut | 6 | |
M4 lock nut | 2 | Use for idler bearing assemblies |
M3 x 10mm machine screw | 12 | Z and Y axis motor mounts |
M3 x 14mm machine screw | 19 | 3 for X motor, 4 for extruder fan, 2 for lcd mount, 4 for lead screw nut mounts, 2 for ramps cooling fan, for for y table |
M3 x 25mm machine screw | 6 | 3 for extruder stepper motor, 1 for fan duct to the extruder, 2 for tensioners |
M3 x 30mm machine screw | 6 | 4 for print bed, 2 for hot end clamp / servo mount |
M3 x 60mm machine screw | 2 | These are used for the extruder |
M3 hex nut | 22 | |
M3 lock nut | 5 | use locknuts for print bed mount and fan duct mount |
M3 washer | 10 | Need 4 for extruder springs, but have some handy if needed elsewhere |
M2 x 16mm machine screw | 9 | These and M2 nuts for mounting end stops, 1 for servo mount, and 2 for LM2596 mount |
M2 hex nut | 9 |
Printed Parts
Piece | Quantity needed | Model file | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
X end idler | 1 | X-end-idler.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
X end motor | 1 | X-end-motor.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
X carriage | 1 | X-carriage.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
X belt tensioner | 1 | X-tensioner.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Y end idler | 1 | Y-idler.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Y belt tensioner | 1 | Y-tensioner.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Y end motor | 1 | Y-motor.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Y table mount | 1 | Y-table-10.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Z motor holder, left | 1 | Z-motor-left.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Z motor holder, right | 1 | Z-motor-right.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Z top frame, left | 1 | Z-top-left.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Z top frame, right | 1 | Z-top-right.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Z lower corner brace, front/right, back/left | 2 | Z-lower-brace-1.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Z lower corner brace, front/left, back/right | 2 | Z-lower-brace-2.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Y frame brace | 4 | Y-brace.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Idler bearing guide (two parts makes one guide) | 4 | Belt-guide-624.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Extruder body / idler / hot end clamp set | 1 | Extruder-direct-drive.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Servo mount | 1 | servo_mount.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Servo endstop mount | 1 | Servo-endstop-holder.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Extruder fan duct | 1 | Fanduct-e3dlite6.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Electronics frame mount (for RAMPS) | 1 | Ramps-mount.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Filament spool support (two pieces) | 1 | Filament-mount.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SMART display frame mount (one piece) | 1 | Smartlcd-mount.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12V PSU frame mounting bracket | 2 | Psu-mount.stl | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Power switch mount | 1 | Power-switch-mount.stl
Everything Else
|