Foton 3Dprinter
Release status: unknown
Description | All-plastic intergrated mechanics
|
License | unknown
|
Author | |
Contributors | |
Based-on | [[]]
|
Categories | |
CAD Models | |
External Link |
Overview
The foton 3D printer's is a redesign of the origional Mendel printer currently being developed by
Fotonlabs
The primary goals in the redesign to this date have been to:
- reduce assembly time
- reduce the time and materials demanded in production
- build upon the printers esthetic value.
- reduce the technical barrier to 3d printing
All of which have aimed at making the Mendel printer more accessible to a wider
group of people both economically and technically
whist at the same time opening it up to the the possibility of mass production.
Materials
The mechanics of this this printer are almost entirely made from a single polyurethane, whist the fasteners and threaded bar are made form nylon and bearing of stainless steel
Production process
The majority of the parts are made from an open cold casting process, which is both time and cost efficient and opens the printer up to the possibility of mass production, with production time currently down to as low as one hour
Assembly
Intergrating many of the mechanical parts has led to a large reduction in assembly time and complexity, with assembly time approximating five hours
See the flickr photostream for build pictures.