RepRap Universal Mini Extruder
Revision as of 14:55, 3 March 2011 by Adrianbowyer (talk | contribs)
RepRap Universal Mini Extruder
Release status: experimental
Description | An attempt to make a very small extruder for 1.75mm filament.
|
License | GPL
|
Author | |
Contributors | |
Based-on | [[]]
|
Categories | |
CAD Models | |
External Link |
Introduction
This printable extruder is intended to work on RepRap Mendel, RepRap Huxley, and virtually any other open-source 3D printer you can find.
It features:
- 1.75 mm filament
- Adaptable mounting plate to attach it to virtually any 3D printer
- Very compact high-torque NEMA 11 motor
- Wade-style hobbed bolt filament transport
- Wing-nut drive to spread the torque loading on the plastic gears
- Push-fit hot-end parts - no thread cutting
- Lightweight: 335g (about half the weight of this extruder)
- Compact design (74 mm x 83 mm x 100 mm)
<videoflash type="vimeo">20596031</videoflash>
Known Bugs
The current Mendel mount places the extrude nozzle about 20 mm in +X of the position of the standard Mendel extruder, so this will print a bit to the right. To be fixed...