BIQ Opto Endstop
BIQ Opto Endstop
Release status: experimental
Description | Revision 0.1
|
License | CC BY-NC-SA 3.0
|
Author | |
Contributors | |
Based-on | [[]]
|
Categories | |
CAD Models | Eagle
|
External Link |
Introduction
RepRap compatible Opto Endstop using an Opto End stop with a 0.5mm beam slightly smaller than the HB102 beam with of 0.8mm. The opening of the interrupter is 5mm allowing for a 3mm black perspex interrupter tag designed for use on Huxley Seedling but can be used on All RepRaps.
Project goal was to Design:
A small low cost PCB < £1.00 for 3 bare PCBS.
Low cost of components.
With a smaller beam to break.
Wider opening for a 3mm interupter and little more clearance.
Three circuit build configurations. ECO, Iluminated, and standard.
Three circuits
To be updated with files and build pictures.