A's plastic processing system
Revision as of 14:38, 3 July 2013 by Abb()minat()r (talk | contribs)
This page is a development stub. Please enhance this page by adding information, cad files, nice big images, and well structured data!
plastic processing system
Release status: Development
Description | 3D printer &
filament extruder
|
License | |
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | |
External Link |
Introduction
the objective of this project is to make a 3D printer and a filament extruder this will be accomplished using parts obtained locally and cheaply
3D printer
The 3d printer will be similar to the ultimaker using the strong points of its design
filament extruder
this will melt raw plastic pellets and turn them into feedstock(filament) to be used by the printer
the extruder will be made by improving upon the previous plastic extruders that have been or are being made for this purpose but the design will be affected by availability of parts
Category:Development Stubs Category:RepStrap