Item |
Quantity |
Notes
|
2020 Aluminum extrusion, 500mm |
4
|
2020 Aluminum extrusion, 400mm |
4
|
2020 Aluminum extrusion, 330mm |
3
|
M10 Smooth Rod, 500mm |
2
|
M10 Smooth Rod, 370mm |
2
|
M10 Smooth Rod, 320mm |
2
|
8mm lead screw, 300mm |
2
|
GT2 timing belt, w=6mm |
2 meters
|
GT2 pulley |
2
|
M5 x 10mm machine screw |
55
|
M5 t slot nut |
55
|
M4 x 10mm machine screw |
4 |
These are used for the psu mounting bracket
|
M4 x 20mm machine screw |
4 |
For belt idlers and tensioners
|
M4 x 25mm machine screw |
4 |
These are used to mount the extruder to the X carriage
|
M4 hex nut |
6
|
M4 lock nut |
2 |
Use for idler bearing assemblies
|
M3 x 10mm machine screw |
12 |
Z and Y axis motor mounts
|
M3 x 14mm machine screw |
19 |
3 for X motor, 4 for extruder fan, 2 for lcd mount, 4 for lead screw nut mounts, 2 for ramps cooling fan, for for y table
|
M3 x 25mm machine screw |
6 |
3 for extruder stepper motor, 1 for fan duct to the extruder, 2 for tensioners
|
M3 x 30mm machine screw |
6 |
4 for print bed, 2 for hot end clamp / servo mount
|
M3 x 60mm machine screw |
2 |
These are used for the extruder
|
M3 hex nut |
22
|
M3 lock nut |
5 |
use locknuts for print bed mount and fan duct mount
|
M3 washer |
10 |
Need 4 for extruder springs, but have some handy if needed elsewhere
|
M2 x 16mm machine screw |
9 |
These and M2 nuts for mounting end stops, 1 for servo mount, and 2 for LM2596 mount
|
M2 hex nut |
9
|
Piece |
Quantity needed |
Model file
|
X end idler |
1 |
X-end-idler.stl
|
X end motor |
1 |
X-end-motor.stl
|
X carriage |
1 |
X-carriage.stl
|
X belt tensioner |
1 |
X-tensioner.stl
|
Y end idler |
1 |
Y-idler.stl
|
Y belt tensioner |
1 |
Y-tensioner.stl
|
Y end motor |
1 |
Y-motor.stl
|
Y table mount |
1 |
Y-table-10.stl
|
Z motor holder, left |
1 |
Z-motor-left.stl
|
Z motor holder, right |
1 |
Z-motor-right.stl
|
Z top frame, left |
1 |
Z-top-left.stl
|
Z top frame, right |
1 |
Z-top-right.stl
|
Z lower corner brace, front/right, back/left |
2 |
Z-lower-brace-1.stl
|
Z lower corner brace, front/left, back/right |
2 |
Z-lower-brace-2.stl
|
Y frame brace |
4 |
Y-brace.stl
|
Idler bearing guide (two parts makes one guide) |
4 |
Belt-guide-624.stl
|
Extruder body / idler / hot end clamp set |
1 |
Extruder-direct-drive.stl
|
Servo mount |
1 |
servo_mount.stl
|
Servo endstop mount |
1 |
Servo-endstop-holder.stl
|
Extruder fan duct |
1 |
Fanduct-e3dlite6.stl
|
Electronics frame mount (for RAMPS) |
1 |
Ramps-mount.stl
|
Filament spool support (two pieces) |
1 |
Filament-mount.stl
|
SMART display frame mount (one piece) |
1 |
Smartlcd-mount.stl
|
12V PSU frame mounting bracket |
2 |
Psu-mount.stl
|
Power switch mount |
1 |
Power-switch-mount.stl
|