Snapdragon
Snapdragon
Release status: experimental
Description | A fully printable RepRap, influenced by the MTM Snap 3D CNC design by Jonathan Ward. Requires only M4 screws and nuts for frame assembly.
|
License | GPL
|
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | Coming very soon
|
External Link |
Bill of Materials (The Vitamins)
This section is under development, and may change frequently, and without notice.
- 4 - Nema 17 Stepper Motors
- 3 - 5mm to 8mm Aluminum Flex Couplings (I'm working on something printable to replace these...)
- 6 - 608 Roller Bearings
- 4 - 5/16" x 12.5" Smooth Rod
- 2 - 5/16 x 8" Smooth Rod
- 2 - 5/16 x 12.5" Threaded Rod
- 1 - 5/16 x 12.5" Threaded Rod
- 12 - 5/16" Nuts
- 24 - 1/4" Flat Washers
- 100 - #6 x 1/2" Pan Screws
- 100 - #6 Nuts
- 8 - 1/2" I.D. Rubber Feet, or substitute (optional)