Category:8/16-bit board

From RepRap
Revision as of 01:46, 29 May 2018 by Hari Seldon (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This page shows Reprap Controller Boards or "Shields" (for 3D printing, laser, CNC etc.) that use (or can use) an 8-bit or 16-bit Micro-Controller. Note: some boards, particularly if designed as Arduino "Shields", may actually also be compatible with a 32-bit MCU, but some such shields may (or may not) require modification: see their actual page for details.