HackerBot base
Revision as of 13:15, 6 November 2015 by Balestrino (talk | contribs)
HackerBot Documentation
** SECTION INCOMPLETE OR OUTDATED **
Assembling Base
| qty | part name | description/notes |
| 1 | Aluminum base 3mm | |
| 4 | M5x10 Button socket head screw |
Printer base can do with different materials. Our advice is to use a metal sheet of 3mm thickness. File:Metal Base AL-3mm.zip
Tighten the base using M3x12 screws:
Put four feets (M8 thread):
** BASE COMPLETE **
** GO TO >> HackerBot electronics **
