HackerBot extruder
Revision as of 09:00, 27 January 2016 by Balestrino (talk | contribs)
HackerBot Documentation
** SECTION INCOMPLETE OR OUTDATED **
Extruder
| qty | part name | description/notes |
| 1 | AluExtruder Kit | https://opensourcehardware.it/en/extruders/548-bowden-full-metal-extruder-kit-175mm.html |
| 2 | M4x10 socket head screw | |
| 2 | HNTF6-4 | T-nut |
Extruder Motor Wiring:
| MOTOR | PANEL CONNECTOR | CABLE (LiYY 4x0.25) | A4988/DVR8825 |
| RED | » 1 « | Yellow | 1A |
| BLU | 2 | White | 1B |
| GREEN | 3 | Green | 2A |
| BLACK | 4 | Brown | 2B |
Cable wiring scheme:
| PANEL CONNECTOR | CABLE | note |
| 1 « | SILICON RED | Extruder power + |
| 2 « | SILICON BLACK | Extruder power ground |
| 3 « | LiYY BROWN | NTC |
| 4 « | LiYY WHITE | NTC |
Step 43: Extruder bowden
PTFE bowden tube is 3.18mm inner diameter, 6mm outer diameter and total length of one bowden tube is 600mm
** EXTRUDERS COMPLETE **
** GO TO >> HackerBot pre-flight check **
