User contributions
- 14:47, 12 April 2010 (diff | hist) . . (+40) . . N File:Black burnout to white.jpg (burnt out coil but beginnings of success) (current)
- 14:46, 12 April 2010 (diff | hist) . . (+11) . . N File:Air dried after 12v.jpg (it exploded) (current)
- 14:45, 12 April 2010 (diff | hist) . . (+12) . . N File:Before 12v applied, air dried.jpg (ceramic test) (current)
- 14:43, 12 April 2010 (diff | hist) . . (+24) . . N File:Coil used.jpg (initial clay experiments) (current)
- 18:54, 16 March 2010 (diff | hist) . . (39 bytes) . . File:Delta Strap.png (Prototype image of delta-strap mock-up.) (current)
- 22:23, 3 March 2010 (diff | hist) . . (33 bytes) . . File:Injection coupling.png (cutout view of injection coupling) (current)
- 23:17, 8 February 2010 (diff | hist) . . (96 bytes) . . File:Upper arm.scad (Utter crap, I'm including for completeness and for the poor soul who attempts to reproduce work.) (current)
- 22:56, 8 February 2010 (diff | hist) . . (23 bytes) . . File:Base platform revision.jpg (honeycomb base platform) (current)
- 22:55, 8 February 2010 (diff | hist) . . (27 bytes) . . File:Outside hex shape.jpg (outside hex honeycomb truss) (current)
- 22:55, 8 February 2010 (diff | hist) . . (26 bytes) . . File:Inside hex shape.jpg (inside hex honeycomb truss) (current)
- 22:40, 8 February 2010 (diff | hist) . . (182 bytes) . . File:Hex truss.jpg (This truss is build using a openSCAD model. It will be replaced by an isotruss. http://www.isotruss.org/index.htm which solves the compression worries I have with the current design.) (current)
- 22:05, 31 January 2010 (diff | hist) . . (125 bytes) . . File:Ball and cup at an angle.jpg (This picture shows the magnet, plastic cup, and ball bearing with a lever arm. This setup demonstrates a magnetic ball joint.) (current)
- 21:58, 31 January 2010 (diff | hist) . . (76 bytes) . . File:Seperate ball and cup.jpg (This picture shows a plastic cup and a iron ball with a lever arm welded on.) (current)
- 14:23, 28 January 2010 (diff | hist) . . (66 bytes) . . File:Joint field lines.JPG (image of how a steel ball and a magnet might fit in a cupped joint) (current)
- 14:21, 28 January 2010 (diff | hist) . . (51 bytes) . . File:Halbach array.JPG (Display of how a Halbach matrix grid could be setup) (current)